Fossil big tic jr8096, how do i reset it after fitting a battery?

go>> http://www.fixya.com/support/t9090037-fossil_modelhttp://www.fixya.com/support/t9090037-fossil_model

Little battery operates the analog. big battery operates the digital second hand on the fossil big tic.

Use tweesters to touch both "+" and "s2" point can change that.

when you look at the back are there three small rectangular indents evenly spaced on the edge on the back? If so you'll need a special tool for opening waterproof watches. the tool adjusts to fit the three indents then press down as you turn counterclockwise. you can find the tool on amazon.com or your local jewelry store. make sure the gasket is in place and not damaged before screwing the back on.

here is a link to the tool
http://www.amazon.com/Pavilion-Professional-Waterproof-Adjustments-Caseback/dp/B000K3SK0Y
.

The big tic has two batteries. The battery for the display may need to be changed and the circuit reset. You can then hold the display button down for 2.5 seconds to cycle through the display function.

i think it pretty much pulls right out, the kid at walmart did it rather quickly.

go to web site they should have directions there

The watch is scrolling through the seconds, and is not something that needs to be set. If there is a bottom it is only there to change the way the seconds are scrolling? There are many different types of these, but most are just standard seconds.

hi i have a watch very simalar. They run on two seperate batteries. sounds like one of them is dead. get the digigtal one replaced