I can not see the record voice in my mp3 when conected to pc
SOURCE: drivers of sandisk sansa c250
Solution:
1. Open the start menu and right click on My Computer
2. Click on properties
3. Locate and click on the "Hardware" Tab of the system properties window that pops up
4. Find the button that says "Device Manager"
5. When you do this, another window will pop up with a list of
all of the hardware installed inside of your computer, you should see
the Sansa Express somewhere in this list with the yellow exclamation
mark.
6. Right-Click on the Sansa Express and click on "Update Driver"
7. When the next window opens up, instead of allowing it to
search automatically, click on "Install from a list or a specific
location (Advanced)" and click next
8. On the next window, click on the last option "Don't search, I will choose the driver to install" and click next
9. When I did this, it had two options listed. MTP Device and
USB Mass Storage Device. If you see these options highlight the USB
Mass Storage Device and click next. It should install Immediately!!
I sincerely hope this helps anyone, I searched and searched on
line for an answer, and I couldn't come up with anything. I fiddled
around with it for a long time.
Try it... [email protected]
SOURCE: my mp3 player is stuck at the voice record screen
Reset it first by holding in the power button for 10-15 seconds. If that fails:
Connect the device to the PC in MSC Mode
View/c200: Turn on then press and hold the rewind button while plugging to the PC
-Tha Mp3 Doctor
SOURCE: How to download the software of SanDisk Sansa m240 MP3
MY PLAYER HAS MUSIC LOADED THAT IS NOT VIEWABLE BY THIS TECHNIQUE BUT THAT IS ANOTHER PROBLEM THAT I CANT FIGURE OUT YET
SOURCE: refurbished SanDisk Sansa 8GB MP3 no installation CD
User Manual:
http://www.sandisk.com/assets/File/Downloads/user-guides/clip-usermanual.pdf
Software:
www.sandisk.com - search for Sansa Clip
363 views
Usually answered in minutes!
×