SHOW F2 40ERROR - Sharp AR-5516s

The Echo Show is an Amazon device that features a screen and a built-in speaker. It allows users to make voice and video calls, watch videos, listen to music, and access a variety of other services like home automation, weather forecasts, and more. It also allows users to connect with other Alexa-enabled devices and control them with their voice. For example, users can control their lights, thermostat, and other home automation systems using the Echo Show. It is also crucial for users to know how to Set up Echo Show.
Setting up the Echo Show is straightforward. It starts with downloading the Alexa app on a compatible device. After installing the app, users need to plug in the Echo Show device and follow the on-screen instructions. Once the device is connected to the Wi-Fi network, users can use the Echo Show to make voice and video calls, watch videos, listen to music, and access a variety of other services.

Method to Set Up Echo Show Home Device and Solve the Echo Issues.
You can follow the steps below for how to set up the Echo Show. Follow all the steps accordingly as well. Check out the below steps:

Plug in the Echo Show

The power adapter that comes with your Echo Show plugs into the smart screen's power port. Connect the other to an outlet nearby. They can power an Alexa Echo Show with a power adapter. Using the device without losing power is possible once the adapter is connected. The power adapter plugs into the wall and connects to the Alexa Echo Show. By establishing a connection, the Echo Show can use energy from a wall outlet without batteries or alternative power sources.

Attach the Echo Show to Wi-Fi

Upon signing in to Wi-Fi, your Echo Show will prompt you to select your preferred language. The Wi-Fi network can be accessed by touching the screen and entering the password. The Echo Show will connect to your Wi-Fi network after you enter your password (If Echo Show or Alexa Won't connect to WiFi then res must here), and you can choose your preferred language from the list. You can use the Echo Show once you select your language.
Read Also Alexa Won't Turn On.

Log in to Your Amazon Account

You will need to enter your Amazon login information when you set up your Echo Show. No matter how old you are, you can create an Amazon account for free. The process of creating an Amazon account and logging in to Amazon Echo Show only takes a few seconds. After this, you can use your Echo Show properly.


Wrapping Up
You can use the above steps for how to set up Echo Show. It is also important to follow all the steps so you can quickly set it up. Or You can contact the Amazon Alexa Customer Service.
Amazon Echo Show Customer Service

YOU did NOT SPECIFY your MODEL NUMBER but tonight ~ Christmas Eve ~ YOU got LUCKY! I found this and it may help you... but
THIS INFORMATION MAY NOT BE FOR YOUR DEVICE!

"LCD shows "Er 4"
Pneumatic system leak
or cuff is too loose during inflation

And this:

LCD shows "Er 0"
Pressure system is instable before measurement
Be still and measure again

LCD shows "Er 1"
Systolic pressure detect fail

LCD shows Er2 Diastolic pressure detect fail

LCD shows "Er 3"
Pneumatic system is
blocked or cuff is too
tight during inflation
Place the cuff correctly
and try again

LCD shows "Er 4"
Pneumatic system leak
or cuff is too loose du-
ring inflation

LCD shows "Er 5"
Inflation
above
300mmHg
Measure again after 5
minutes. If the moni-
tor is still abnormal,
please contact the
local distributor / ma-
nufacturer.

LCD shows "Er 6"
Over 3 minutes while
pressure above 15
mmHg

LCD shows "Er7"
EEPROM accessing er-
ror

LCD twinkling
Device
parameter
check error

LCD shows "Er 9"
MCU self-verity error

LCD shows "Er A"
Span error

LCD shows "Er b"
EEPROM Backup-error


http://webcache.googleusercontent.com/search?q=cache:V0KPe0jswmgJ:www.hmm.info/uploads/tx_sbdownloader/smartLAB_profi_user_manual_ENGLISCH_R4.pdf+&cd=2&hl=en&ct=clnk&gl=us&client=firefox-b-1

when you power on your fax machine and display show DATA ERROR its mean that 3 volts battery on the main board expired and lose all data fax number, logo and related with cartridge ink data so first of all you replace the battery. (this is a pure technical job and if your are not a technician you must take help of a technician)
After replacement of battery you power on fax machine and press
function key display show DATA REGISTRATION
press # display show #1SSSW
press left arrow key one time display show TEST MODE
press start/copy key display show TEST MODE [1]-[8]
press # display show AMI MODE
Press 7 display show FACULTY 1-6
press 5 display show INK CHECK 1-2
press 2 and start key
display show INK=YES and INS (ink level any one within 100 for example 42/205 you just remember first two digit of lest side)
press stop display show FACULTY 1-6
press 6 display show LOST INK CHECK
press start/copy key display show LOST INK CHECK [1]-[2]
press 2 display show SET LOST CNT
press start/copy key display show LOST INK= (here you enter the last left side two digit which you remember for example 42)
press start/copy key
press stop two times
and unplug fax and plug again now your fax machine is okkkkk
NOTE:- If you can't get the success first time you must try until you get the success because this is the only way to get success

http://www.intermatic.com/products/timers/consumer%20outdoor%20timers/digital%20timers/hb88rc.aspx

HB88RC is 7-day plug-in digital outdoor timer that uses AA battery installed on back of timer to power the display.
People write to fixya frequently report Intermatic timer stops working after replacing battery.

To check if your timer is still functional:
Press and hold clock button.
Press Day button until current day shows in display.
Press Hour until current hour shows in display
Press MIN until current minute show in display
Release clock button.

If current time shows in display, then timer is probably still good.

To set programs:
step 1) Press PROG button until 1 and ON show on display.
This is program1 ON.
Press day button until choice of days shows for program1 ON
Press hour until hour for program1 ON shows
Press MIN until minute for program1 ON shows.

step 2) Press PROG button until 1 and OFF show on display
This is program1 OFF.
Press day button until choice of days shows for program1 OFF
Press hour until hour for program1 OFF shows
Press MIN until minute for program1 OFF shows.

step 3) Press PROG button until 2 and ON show on display
Repeat steps above to set program2 thru program7

step 4) When programs are set, press CLOCK button to return to current time

step 5) add a comment for more help

not sure if this link will help you out but have a look.
Fantom drive shows up as Drive Google Search

mode exec user Router)
ping ip
show ip route
show version
traceroute ip

mode exec priveligiado
show arp
show interface
show protcols
show ip protocols
show startup-config
erase startup-config
reload

Go to programming of Norstar bY Feature**266344 passwordwill be 266344.

Press show put the extension number then show the keep pressing next until display shows restrictions.Press show the next until dispaly shows ext rest. then show then show again and check what is the restriction filter number.
Press heading till u get restrictions.press show then show again. put the restriction filter code and delete or remove all restrictions from the filter and press release and come of the programming.
Restriction has been removed now.
After that u can easily make o/g calls without using any code.

in spam the message will shows wit the count so check it out

I found it by myself, I can help you.
1. Press (AC)
2. Hold (Rate) for about 2-3 second
3. Press (Set / TAX+)
4. Input the tax rate
5. Press (Set / TAX+)
6. Hold (Rate) for about 2-3 second again
7. Press (Set / TAX+) again
And Then you can test the rate .

From Thailand