Blurry right side - Epson Cameras

Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/

Check the site linked below, and compare the screen shots. It has many kind of defective screen-shots to plasma displays. Compare them to that of yours, and make sure about the faulty board or others. http://electronicshelponline.blogspot.com/

Does it improve when the set warms up? Is it the entire screen or just the left or right side? These sets are notorious for faulty LCD panel tabs which causes blurry/delayed picture problems.

Does that set have whats called a color wheel, if so that maybe you problem, and replacement is how you fix it.

It under a year?Call Sony for warrenty repair,it ur Tuner signal board it have problems.

Ur convergence is dead,need convergence kit.
U know how to solder right?Tries these websites for convergence kit.Tv Repair World.com,Shopjimmy.com,Ebay.com or Partstore.com

needs a convergence board repair, not too hard to fix if you are handy with a soldering iron.

get the 2 convergence chips for this model @ partsstore.com

Try adjusting the camera lens by rotating it from Left to Right. Hope this helps. Bud

Turn to clock side the "black o-ring" of the front lens !

Convergence IC's should be replaced before any alignment is
attempted ....part # STK392-560....You need two......mount
to large heatsink...............T.