Need TV codes for using the comcast DTA remote

Hello
Codes for Broksonic with Comcast DTA remote are :-10236, 10463. OK

ask at manualfox.com/remote.htm
they will figure it out

http://www.fixya.com/support/t2077592-need_tv_codes_using_comcast_dta_remote

I used the 11911 code for the same tv

Try website 1-800-Remotes Factory original.To buy an exact remote or very close to the original.

That unit may have been built by Funai, the poorest of the Japanese electronics companies.
You might try any codes you find for the brands listed below, all of which are made by Funai:
Funai, Symphonic, Sylvania, Emerson, Aventura, Durabrand, ESA, Magnavox, INSIGNIA, Philips and Misakai

RCA TV/VCR Combo Model T09085:
Comcast Digital Adapter Remote (DTA) Code is... 00000

Comcast Universal Remote - Red OK/Select Button (DTC)
Code is... 21479. This code controls TV On/Off and VCR All functions. I could'n find code for vol+/vol- and mute.

I just went through this last night with combo, similar model. They tell you to use the power off test to see when you've got it - nothing worked for that. Then I tried the Panasonic codes and used the volume control as a test, which is much more important, and I found the 3rd code worked for that. I figured, close enough for me, and better than nothing.

try the philips combo codes 20035, 20081, 20618, Dale

I did not solve the problem, nor can I afford to pay you for your solution. Thank you!

Comcast says that if the codes listed in the instruction brochure provided with the remote (10236 and 10463 for Broksonic) don't work, you should code 991 into the remote and then press the CH+ button repeatedly in order to search through the library of installed IR codes until the TV turns off, then press SET once to lock the code. This worked fine for me, although I must admit I had to press the CH+ button well over 100 times until I came across the proper code in the library to turn the TV off. Unfortunately, there is no way to know what 5 digit code this represents so that if I need to reprogram the remote in the future, I will need to go through the same time-comsuming process all over again.