Check to be sure that you do not have an open in the phone line.
SOURCE: HP6450 says fax log is full and cannot recieve or send.
tools
).
>
) until Tools
displays on the control panel, and then press
OK
.
>) until Fax Log
displays on the control panel, and then press
OK
.
>
) until Clear Fax Log
displays on the control panel, and then press
OK
. A message that says the fax memory is clear displays on the control panel.
) to exit.
SOURCE: HP 5610 All-in-one can recieve faxes but not send,
Have you set for the proper dialing? there's a choice for pulse or tone dialing, you probably need tone dialing. Also the number needs to be put in just as you would dial on a phone.
SOURCE: I can not send or recieve faxes. Ran fax test
you need to find a telephone with 2 conductors and not 4. I tried it and it worked. Cable phone service does not use VOIP it actually uses services similar to the telephone company. Instead of converting the analog signal of the phone somewhere down the street at the switch it converts it to digital at the cablemodem and sends it at different frequency on the cable. It then goes to the cable company and hooks into the regular telephone system.
SOURCE: hp 3050 laser jet printer the fax page is black
The scanner in your FAX is nothing working -- i.e., "100%-black" or "100%-white", and so what is transmitted is what the scanner has scanned, improperly.
SOURCE: Epson workforce 610 cannot receive faxes
check your rx setting (receive) mode ?, fix it to auto mode
26 views
Usually answered in minutes!
×