Error code SC440 - Lanier Ld345 Ld335 Ld245 Ld235 Ld145 Upper Fuser Roller

http://basketballgames.io/
Basketball Games, you are the all star team. Do quick match, tournament or even play against your friends in 2 player mode. Call your friend right now, set your team and get ready for super struggles which are tough from each other.

Remove your driver and reinstall the printer driver by using the CD or via the internet. It should work

replace black drum unit

Possible Drum motor, or sensor - you would do best getting a professional in to repair, as self repair on these will no doubt end in issues..

Too much load on rive or main motor defective..................

The problem is Main motor error.

•

The problem can be two diffrent things.

1. Defective main motor
2. Too much load of the main motor drive

On the CL7200, sc440-02 is a color drum motor error. This error could be caused by a bad color drum unit (any of the 3 colors) or the drum gear positioning sensor, but more often than not it is because of a drum motor that went bad. There is one motor that controls all three color drums -- when this motor goes bad, you get the sc440-02 error.

sc440 on the CL7000 is a drum motor error. sc440-2 is specific to the color drum motor. The problem is either the motor itself, the drum gear position sensor, or one or more of the color photoconductor units. The photoconductor units you can replace yourself if you have extras -- see if that will clear up the problem.

If they don't, you'll need to contact a service technician to inspect (and replace if need be) the motor and sensor.

Please rate this solution if it was helpful. Thanks!

Black drum motor error. These machines are bad about the waste toner building up in the drum unit. You could try and take the auger out of the drum unit(very messy) and clean it out or try replacing the black pcu.

I think the code is a black pcu motor lock. Replacing the black pcu might fix it, but the black waste toner section could be backed up.