How do i get to user mode on my polaroid tv - Polaroid FLM-3232 Television

On the back of the TV there is a VGA in port !
On the remote you have to press computer key !
from page 27 of the tv user manual
http://tv.manualsonline.com/manuals/mfg/polaroid/tla04011c_tla4011tlxb.html
being an unknown model of toshiba satelite laptop the F4 key needs to be pressed to switch windows video mode to duplicate .

As the TV is a new one, it might be an operators error. Refer its user manual for details. If it do not help you, contact the dealer.

Hello

I believe that you have the orginal remote control of Poloroid FXM-2611C with you, and posts this solution
There is a 'square button' on the extreme left just below the "Disp" button marked 'TV'. Repeted press of this button, you can change the input mode to TV/AV.

To select different input modes use [input] button.
You can change the inputs to various modes. Refer to its user manual for details. OK

Having browsed the user manual I wonder if you plugged in the Sony BDV T57 Home Theatre System while the Polaroid FLM-2632 tv was powered down via the optical cable .
Then powered up the Sony BDV T57 Home Theatre System first and then powered up the Polaroid FLM-2632 tv
Maybe the Polaroid FLM-2632 TV has to detect that the Sony BDV T57 Home Theatre System is connected and powered up when the Polaroid FLM-2632 powers up. To activate its digital audio out ????
The note part about only being available only under HDTV (cable/air) mode. Might be the cause of your hassle also ?


DIRECTLY FROM THE USER MANUAL
source from
http://tv.manualsonline.com/manuals/mfg/polaroid/polaroid_flm_flm2632.html
"
? Connecting to Audio Receiver:
Use an audio cable to connect the audio receiver's audio LINE IN jacks to LCD TV's
AUDIO OUT jacks. ? Connecting to Digital 5.1 Sound System:
METHOD A:
Use an optical cable to connect the audio amplifier's OPTICAL IN jacks to LCD TV's
OPTICAL OUT jacks.
METHOD B:
Use a coaxial cable to connect the audio amplifier's COAXIAL IN jacks to LCD TV's
COAXIAL OUT jacks.
Note: Above mentioned function is only available under HDTV (cable/air) mode.
? Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
? Press the button on the remote to turn on the LCD TV."

this unit has presets for movie or dynamic and user settings set to user then adjust your briteness to waht you want

Polaroid TLA-04011C
You can get the user's guide from;
http://www.polaroid.com/service/userguides/ce/lcd_tvs/tla04011_ug_en.pdf

You can get the quick start brochure from;
http://www.polaroid.com/service/userguides/ce/lcd_tvs/26-47_tlxb_qs_en.pdf

You can get a service manual from;
http://www.polaroidsupport.com/polaroid/docs/TLA-04011C_TLXB-4011_TLXB-4241_ServiceManual_20070613.pdf

The information is oriented to service but you can get infomation on operation
starting on page 10.

One place you can get the remote from;
http://www.remotes.com/

select picture mode.press right arrow button to change your picture mode {vivid,sport,hi bright]to change sitting you much choose user mode.the other settings are factor settings.

The user manual was no help. I called Polaroid and they help me solve the problem. Very helpful and spoke English which is unusual for customer service anymore.