SOURCE: northstar pressure washer randomly gives pressure
Hi:
You need to find the bypass (unloader) valve and grease it with a good waterproof grease. Sorry, I cannot find a pic for you
SOURCE: oil leak at top of pump
The oil in the pump is probably leaking because a seal is blown and water is getting into the piston housing. Take a look inside at the oil. It should be brown and translucent. If it is gray, white or milky, you have a blown oil seal. This reservoir should only be 1/3 full of non-detergent oil to begin with. Hope this helps
SOURCE: my washer vibrates and has low pressure, whats wrong
add some oil to the hydrailic pump it may be low.
SOURCE: Water does not come out of the lance when I squeeze the trigger
HI it sounds like you may just have a blocked jet on the end of your lance. Please remove and clean.
SOURCE: what kind of oil does the pump on the nortth star
Hi, W/D here.
Usually, they use universal tractor transmission fluid. Here's a link that will take you to available models and manuals:
http://www.northerntool.com/shop/tools/product_200347874_200347874
Best regards, --W/D--
Please feel free to rate our solutions so that we may continue to help others. Thanks.
52 views
Usually answered in minutes!
×