Stored settings and auto eject

HappyNew Year!

Bought myself a couple new CDs. I pressed the LOAD button and the system flashed the green light. I couldn't get the dang stickers off the case on time and then the deck stopped waiting for me. (Normal) But when I was finally ready to try loading it again, pressing the LOAD button didn't do anything. So then I tried to click eject (5 of 6 discs were loaded) and nothing happened other than a message saying "please eject disc"? Press eject again and for a split second it says "Ejecting Disc"...but then nothing happens and the message goes back to "please eject"....

I have tried waiting overnight. I tried unplugging the battery too. No changes. Maybe I did not leave it unplugged long enough?
the strange thing is that this same scenario happened to me two years ago and then one day the disc just ejected after a day or two and I don't remember doing anything special.

Does anyone know about this or what I can do to eject or reset the unit?


Thanks!

pls. unplug the unit then plug it again, turn power on, eject. just repeat this sequence until the cd tray will open.

There are two reasons for this fault. The first one is with its disc loading mechanism. If the mechanism do not place the disc properly on to the reading chasis, this fault can be. It will spin for some time and will ejected automatically
The second one is with its optical pickup unit. If optical pickup unit do not read the disc; due to some fault to it [dust or dirt over the optical lens]. But in this case, there will be only "No Disc" display will be there. No automatic ejection will take place.
With your player, the first sated might be the case. The disc loading mechanism might need replacement.

you may have a dirty pinch roller. it can be cleaned with qtips and rubber revitalizer. do not use rubbing alcohol or anything else. you can try dry qtips, it might work temporarily.

The loading mech or poss. the read portion of the disc player is out of whac. In other words the cd dvd portion of your deck is defective and short of having it repaired by a techinition there isnt much you can do. Its a **** shoot but you may be able to unplug the unit let it set for a few minutes and plug it back in may rest the mech., but like I say its a **** shoot. Sounds like its time for a new deck or a trip to the repair center.

you need to call radio shack or a stereo place to see if they can help if you take the loader out and bring in.

HI...

There might be a round access hole on the bottom of the case with a symbol near it.If it does , turn the screw down inside. Many CD players have a Panic hole like that.

Remove the power completely replug and then quickly turn it on press eject emediatly..... this should work