At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Subwoofer was working okay and now I have a subwoofer...
CHECK THE WOOFER SETTINGS FROM THE MAIN MENU. AND CHECK THE WIRE CONNECTED TO UNIT. CHANGE THE WIRE, IF STILL NO SOUND, GET IT REPAIRED TO YOUR AUTHORISED PERSONNAL.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
sub woofers are very powerful bass , with incredible sounding technology. your problem might be with the woofer wall around the circle. open the box and take the woofer out.Check if there is any tare over the corners of the cloth. sometimes there might be a crazy noise because of a little opening in the cloth caused by small tare.. if so better change it with a new 1 and make sure that the new cloth has guaranty
damaged sub woofer eg.
torn cloth-
Thanks for rating
good luck
pull the surround off around the 4 disc changer, and radio deck; when you do this the heater control unit will come out with the bezel which is okay. there are two philips screws to remove on the 4 disc once you pull the suround off. carefully pull changer out once srews are removed and remove the black face plate (4 gold screws on side). once that is off you need to remove the top metal part with the part nu,ber label on it...should be 3 silver screws, once this is off ou should be able to with your fingers, one by one remove the cds by pushing them out of the slot opening, there is a white gate though that you need to push down, hard to explain just be careful, and you will figure it out.
pul the board out of the subwoofer box and check that the connector is soldered to the board properly if not the sound will sound scratchy.
hope thes helped
as the tv stations that were being feed into the system were digital and the nput was actually analgoue 2 optical cables are required.
have tv sound and blue ray sound through surround sound when tv channels were changed to analague.
i had err 2 screen. removed case (about 10 screws, took just a few minutes) and found 1 disc was had been knocked out of the tray. removed all discs. replaced case. works fine again
Do a more detailed search there is a solution but you will have to send it out to get repaired the noise is from when it goes on stand by...jensen is of no help
torn cloth-
×