Remote control 4-digit number for AT&T uverse controller

There is no set-up code to AT&T Uverse box, with RCA remote control. You have to select an other remote control for this box.

If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its user manual. Never accept a remote control, that hasn't both of this. If you see the site by "MOSAIC" or "Magazine" view, will make surf easier.
http://electrohelponline.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops.
Check this link too. http://remotesearch.blogspot.com/

Hello, Mr. Ross.

I'll be more than happy to assist you with this and all of your other Uverse concerns.

First please write these codes down, these are the TV codes for your Mitsubishi TV,
0093, 0150, 0178, 0019 (we are going to do trial and error for these codes till we hit the correct one for your TV.)

Please turn the TV on and point your ATT remote control.
Okay, using your ATT remote control, please press and hold the TV button together with the "OK" button.
All four modes should flash twice indicating that we are programming your remote control.
Now, enter the 4 digit code and the selected mode (in our case it is the TV) should give a long flash.
Then press OK.
Try to turn your TV off and check if it would respond
If not, please redo the steps but this time use the other codes I provided earlier.

If these codes wont work we will do the automatic code finder if you are using the "black" AT&T Uverse remote control.

Using your ATT remote control, please press and hold the TV button together with the "OK" button.
Then press the "scan/ff" button repeatedly with atleast 1 second interval till it turns your TV off.
Press OK then try to turn your TV on again.

Whenever your remote won't respond, try pressing either the AT&T button on top of the remote before any other buttons or the TV button beside the ATT button.

You will have to provide the complete make and model number of your TV before we will be able to check and see if your uverse remote will control it or not. Thank you.

i currently use uverse and none of there remotes work for dynex tv's i suggest buying the logitec harmony 520 or 420 or above remote from amazon read the reviews there around 40 dollars and lets you control everything and they connect to you pc you just plug in you model number and the remote learns all the commands as well as lets you set up activities that will allow you to control multiple devices without having to switch between hitting the tv button, home theater button, uverse box etc.
hope this helps.

Hi,

AT&T don't list any codes for Hannspree, but I have it on good authority that either code 1004 or 1018 work for Hannspree. Others have reported that the some of the codes for Vizio TVs will also work. There are: 1489, 1429, 1433, 1439

If none of these codes work, please let me know and I'll try to find some alternatives. It would help if you could let me know the model number of your TV to narrow my search.

I'd also be grateful if you could let me know which, if any, of the above codes worked for future reference.

Regards,
BElectric

uverse remote control user guide pdf shows 346 but requires a 4 digit number.

after some trial and error, 1346 worked for me.

1382, 3213, 1383, 3202


try one of those

hi..the remote control that supports ur LG
is Universal Remote Control Inc. Digital R50.
This will definitely suite ur tv.
try this out.
thank u..
rate me..

THRER IS NO CODE THAT WILL WORK WITH THAT MODEL I EVEN CALLED SYLVANIA AND THEY TOLD ME THERE ARE NONE