Where can I purchase a printhead for my HP Photosmart Plus B209A? Prod #CD034-64005, S/N CN09U4D06P. Numbers on printhead assy. 2010/08/03L and 1600263016891404. I see a lot of retoric on various sites but no help.

Hi,

You can try to put the printhead on hot water for some hours. Before you put the printhead back in printer you must dry it with towels to prevent short circuit and damage the printhead.

I hope to be usefull !

Couple things: Look inside a printer with flashlight and make sure there is nothing in the way. Remove printhead and see if error goes away. See this video where printer has similar code and is fixed:

Your printer ink cartridges may be dry or empty and printhead may also be dry. Try the fix in this video and order some cheap ink cartridges off ebay. They always work for me. Example link below:
https://www.ebay.com/itm/382706888626

Step 1: Click on Windows icon (bottom left hand screen)
Step 2: Select Devices and Printers
Step 3: Right Click on "HP Photosmart Printer Plus B209a-m"

Step 4: Select "Printing Preferences"
Step 5: Click on Tab "Features"
Step 6: Select "Printer Services" in the bottom right hand corner
Step 7: Click on tab "Network Settings"
What you click on there depends on what's wrong with your setup, I think. Mine had a "Configure Wireless" option where I was stepped through the process.

Good Luck!

you can contact hp support center and tell them the problem they will tell you about there distributors in your country...

Hi,
You need uninstall first software driver of HP PHOTOSMART PLUS AIO PRINTER B209A PHOTOSMART PLUS AIO PRINTER B209A All-In-One. and Then reboot your PC. then install again software driver for that printer select English language version.

Try this link An '0x ...' Error Message Displays on the Front Panel When Printing HP Photosmart C5380 All-in-One Printer - HP Customer Care (United States - English).

If you need more help post back!
Thumbs and testimonial are welcome!

It could be a bad printhead or just some ink got on the electronics contact part of it. Check out the video to resolve this issue:

Try this solution:

Hi,

Are you getting the error " Printhead problem ' or 'Printhead appears to be missing or damaged " on the printer screen ?

If so, there are few steps to be followed to resolve the issue. I cannot mention the troubleshooting steps with images for Issue, so please click on the link given below to resolve.

Do this step before you follow the steps given in the link and check if this resolve's the issue.

On the Printer SCreen
Press the Setup button
Choose Tools
Choose Clean Printhead

Let the printer go through the process of cleaning.

If the above steps does not fix, click on the link below
Printhead Problem link


Thank you for contacting FixYa


* Please rate this solution with thumbs up and comments