I have a 2006 street guide and on the main screen their is no selection for Aux to use my iPod . There use to be a option but now it is not displaying

I was wandering the same thing, but another option is a AM/FM Transmitter. you can buy one at stores like best buy. You plug your Music Device (iPhone, iPod..etc.) into it and it transmits it to a AM or FM band so you can tune into it with the AM/FM function and listen to your music so you dont hvae to buy a new radio.

yes, i use mine all of the time... the jack is located in your glovebox. all you need is a cable that has two male ends that you plug into the headphone jack of your ipod and the other end in your aux jack in the glovebox (normally on the top i believe).

Not all sound files speak out the street names. Procedure to get the street names spoken: Tap on main screen. Tap on options. Tap on voices and images. Tap select a voice. Tap Susan, English US, Speaks Street Names. Tap select. Tap continue till you reach the main screen.

Not all sound files speak out the street names. If you want, street names spoken, you need to select a voice that ends with computer. For example, the voice file selection: Simon, English UK, Computer will speak street names. But the voice file, Bonnie, English US, will not speak Street names. Dave, English US, computer will give you street names but Lori or Mandy, English US will not. Procedure to get the street names spoken: Tap on main screen. Tap on change preferences. Tap on arrow. Tap on change voices. Tap (select) a voice that ends with computer. Tap select. Tap done till you reach the main screen.

You need to plug the iPod into the Aux socket, its on the front bottom right corner. Then you can switch by pressing "Mode" between playing either the CS - USB - SD - AUX.

To play iPod, select the "AUX" option.

I think this can be done with the stereo on but you have to hold down either the e button or 1 of the buttons on the right side of face(not audio)maybe and a menu will pop up and you should run into a screen that ask off on or off you will want it on and then you should be able to access ur ipod by pressing the source button.Hope this helps.

Hi guys, just figured out how to hook up your Ipod to the above mentioned stereo, Here is how...

- Put your stereo in STBY mode, then push the menu button, scroll up or down and you get different options to change clock and AUX settings, my AUX was OFF and I had to select ON. Now you can push your Sorce button (the one that puts the stereo in STBY) and you will have the AUX option this will allow you to play your MP3 players and Ipods. ENJOY!

I spent a few hours looking for this very explination so I hope this saves the rest of you some time. Safe driving.

Try these options

Option A:
Select the GUIDE Plus+™ Menu from the Main menu.
Select Setup.
Select Options.
Select Off.

Option B:
Select the GUIDE Plus+™ Menu from the Main menu.
Select GUIDE Plus+™ Auto Display from the GUIDE Plus+ menu.
Select Off.

Option C:
Press GUIDE on your remote control.
Select the Menu bar.
Press the right arrow button to select Setup.
Choose Review Options.
Select Off.

press menu button on the click wheel until you get to the main screen (screen doesn't change anymore) select the 3rd option down, then the 13th option down. then english

According to the manual, you need to "enable" the AUX 1 or 2 thru the initial settings menu.

Press and hold the SRC until the unit turns off. Then press and hold the MULTI CONTROL (knob) until the Language appears. Turn the knob to cycle thru the options, select AUX 1 or 2 and press the knob again to select ON.

After selecting them to on, power the unit on and press the SRC to cycle thru the sources to find AUX 1 or 2.

The owners manual is here if you need it;

http://www.pioneerelectronics.com/pna/v3/pg/support/details/0,,2076_310070337_338818745,00.html



Best of Luck.