Add phone number name to the directory - Vtech Cordless 6041 Phone

To set up a speed dial option, make sure that the phone system is in standby (no handsets in use). Make sure that the number you want to have as a Speed Dial number is in the Directory. You can type in the number (up to 30 digits) and then press Select (shared key with Menu to the upper right of the arrow keys). Alternatively press Menu and use the up/down arrows to navigate to Directory. Press Menu/Select twice. Type in the phone number. Press Select to move to adding a name with the number key. Press Select to Save. You can also add a number from the Redial list. See the abbreviated manual on page 7. Press Off/Cancel to return to the previous menu list. Press and hold Off to exit the menu system completely.

Now, press Menu (if you aren't in the menu) and use the up/down arrows to navigate to Directory. Press Select. Scroll to Speed Dial and press Select. Select a speed dial location and press Select. Scroll through the directory list and press Select when the correct entry is highlighted. Press and hold the Speed Dial number (0 or 2-9) to dial this number. See page 8 of the manual.

The abbreviated manual for the CS6629, CS6629-2, etc is available here: https://phones.vtechcanada.com/media/document2/products/%7B76B9FBDF-8471-4E06-BE52-B0E8A258E5F8%7D/CS6629-3_CAAUM_3_912.pdf .

I hope this helps.

Cindy Wells

It depends on if it's the voice mail dial by name directory or the directory on the phone system.

Louis at CT Innovations
502-814-5100

Try adding your voice mail access number into the directory of the KX TG2770. You will need to enter the number separately for the base and the handset or copy it from the base to the handset. On the base, press Conf/Edit. Then navigate (up/down arrows) to Save Directory. Once in this submenu, you'll be able to add a name and phone number.

Then to call the access number, go to the directory list and locate the name/number and call it.

Panasonic has the manual for your phone here: http://service.us.panasonic.com/OPERMANPDF/KXTG2770S.PDF . See page 33 and the following pages.

I hope this helps.

Cindy Wells
(Other phones have a voice mail waiting icon and let you program that number outside of the directory. These also check if you have voice mail waiting for the line that they are connected to. This phone doesn't seem to have that ability.)

Hi you need to do this in 2 parts - firstly to add yourself to group 501 follow the step-by-step instructions which are on the video I have posted. Then follow this to add a mobile number to the directory;

Press the TSFR key

Enter 200

Enter code 1234

=/- key to enable

Speaker key

dial 705

I.e. once in 705

Type in speed number, the cursor will tab over to speed dial slot.

Enter 9 followed by the phone number.

Press 12th button down,

Enter name,

Press 12th button. (You will be back at the speed dial.)

Press tab, then enter the next speed dial slot you wish to program.

NB-
( 705 - Speed dial 12th Button down to toggle between)

( 706 - Speed Name the 2 MMC

i have the same prob any ideas?

Press menu button and select Contacts > Options > SIM contacts > SIM directory to see the names and numbers stored on the SIM card. In the SIM directory you can add, edit, or copy numbers to contacts, and you can make calls. To view the list of fixed dialing numbers, select Options > SIM contacts > Fixed dialling contacts. This setting is only shown if supported by your SIM card.

Adding Subscriber Mailboxes:

1 – Feature 983
2 – Log: = 1020000 (3-digit DNs) or 120000 (2-digit DNs)
3 – Press MBOX
4 – Press ADD
5 – Mbox: enter mailbox number to be added
6 – Type:subscriber Press OK
7 – Ext: Dial station number (the mailbox and extension do not have to be the same, but for simplicity keep the same)
8 – Service class: Typical class is 1
9 – Name: Enter name (last name, first name) per letters on keypad. Dial as in texting for each letter. Press # to enter a comma between last name and first name.
10 – Directory?: YES or NO (for dial by name for company directory)
11 – Msg waiting: YES or NO (to enable “Message for you” display on phone press Yes)

After this set, you can pass by all the other information, since this is a basic setup for a mailbox.

Now that you created the mailbox, you still have to go into the programming to enable forwarding to voicemail.

There is a directory button on your Meridian-press this button and press the down arrow key until the name is displayed in the display window and press your left arrow key to change the name and number after making the correction press your save button to store.  I hope this helps.

First you need to verify if the caller id does that to all incoming calls, showing numbers only, or if it only does that to only numbers stored in directory. If it does that to all incoming calls then you need to check manual to see if there a setting to allow both name and number of all incoming calls. Either way you need to make sure caller id functions allows both name /number on display.

you need to know where or what mailbox the directory is recorded in. If you are using the generic one that does spell by name, than you cannot change it. You need to have the new employees setup their mailboxes and add themselves to the directory. ldtsnj.com