Bluetooth is turned off. I keep getting popup asking if i would like to turn it on. when i answer no - it repeat the question forever. if i answer yes - a new popup is looking for MY RADIO and keep jumping - help

1. Turn on your bluetooth and make sure that it's not connected to other devices.
2. Put the Bluetooth in seeking mode(searching for devices)
3. Go to your iphone and go to settings, General, Bluetooth and turn it on.
4. Once your phone picks up the Bluetooth click it. Then it will then ask you for a 4 digit pass code. Standard ones are 1234 or 0000.
5. If that still doesn't work try turning off your Bluetooth and then turn it back on holding the power button. This will allow it to restart and start again. (this is what I did for mine) then repeat the process again.
Hope this helps.

The passcode is just "0000" without the quotes of course.

Please make sure you rate my answer 4 thumbs up, it is extremely important to me. I would be forever grateful if you could do so. If you need more help on this question please just respond to my answer here and I will get right back to you.


Thanks
Tim

The passcode is just "0000" without the quotes of course.


Please make sure you rate my answer 4 thumbs up, it is extremely important to me. I would be forever grateful if you could do so. If you need more help on this question please just respond to my answer here and I will get right back to you.


Thanks
Tim

The passkey is just "0000" without the quotes of course


Please make sure you rate my answer 4 thumbs up, it is extremely important to me. I would be forever grateful if you could do so. If you need more help on this question please just respond to my answer here and I will get right back to you.


Thanks
Tim

Yes that was happening to me also with my VW. What i did was (and you must do this very quickly) turn all bluetooth off your phone and turn off the radio and car then in the space of 5 seconds, turn your ignition on then your radio then your bluetooth and keep hitting the phone button (answer button) in your vehicle and your phone should ask you for a password....thats how i did it and now i have paired my device... on that note altho my phone works and i can answer and make calls through my parrot bluetooth i am stuck trying to get my music to work through the bluetooth.....so hopefully someone can help me now.....

Your Garmin has Bluetooth handsfree activated, it's nothing to do with navigation. All that's happening is that it's sensing that your n97 has Bluetooth turned on and so your Garmin is asking whether you wish to pair the devices.

Paired or not, your Garmin still uses it's own internal GPS navigation and does not utilise the navigation built into your n97.

If you already use your own preferred handsfree device then just go into the Garmin's menu to turn off Bluetooth. If you don't already have handsfree then I strongly suggest that you pair your phone to the Garmin and use the facility to remain safe and legal.

If you wish to disable Bluetooth on the Garmin then on most models, starting from the homepage, you press "tools", "settings", "Bluetooth" and then click on "Bluutooth enabled" and toggle it to "disabled".

I hope that this answers your question, you can let me know by rating my answer. If not then please add a comment instead to more clearly explain what your problem is and I will try again.

Is it desktop or laptop computer?
If its desktop the data cable might be loose on the back of the desktop computer.

Your bluetooth is turned off.
Go into
MENU> SETTING> CONNECTIVITY> BLUETOOTH> STATUS (I THINK) ITS THE LAST OPTION> MAKE SURE THE MIDDLE OPTION IS NOT TURNED OFF.

try yahoo

Linux and UNIX wget command help --dns-cache=off, Turn off caching of DNS lookups. Normally, Wget remembers the addresses it looked up from DNS so it doesn't have to repeatedly.

Good Luck, Please dont for get to Vote/Thank You.