Hi,
As i installed new Windows Vista web cam software and lenovo resuce and recovery software not working. " i had a same model (3000 N500) near to me working in good condition. is this possible to install all the software from that. if so please tell me the procedure.
Syed.firi
You cannot grab the drivers from one computer and copy it to another computer, you need to know which files and also there would be some register entries.
If you have the driver disk, then you can use the same disk to install the driver onto another computer, provided they are identical.
Go to the IBM/Lenovo WEB site - support/download page and download the latest Windows Vista device drivers for your model laptop,
Use this link :-
http://www.ibm.com/products/finder/us/finders?pg=ddfinder&cm_re=other-_-suprcn-_-download
After you download the driver file, click on this file and it will unzip/expand the drivers and copies these files to the hard drive in c:drivers... take a note of the folder it has created to store the driver files and then go to this folder and run the SETUP file to install the driver.
359 views
Usually answered in minutes!
×