I just got my wheelman g-wheel 50cc gas skateboard and it starts right up and sounds great but when i give it gas it will not move. it is brand new and never has been driven before. when lifted off the ground and given gas still nothing happens with the wheels. please help i am so excited to ride my new g-wheel

A bunch of surfers, with the oceans becalmed, having nothing better to do, cobbled up wheels on a flat plank and satirized surfing. That was how sidewalk-surfing came to be. This was sometime in the 1950s and the first generation skateboards came to life. Of course, they were a whole lot different than the sleek skateboards of today. Longboarding came around much later and its popularity is pretty recent in the last few decades. Skateboards never quite created the frenzy of surfing but in the 1990s, the scene exploded. Snowboarders and surfers teamed up and longboarding really took off. Longboards are much smaller than surfboards. They are versatile in shape and design and can be used in various terrains.
Check the link https://scooterlay.com/longboard-vs-skateboard/

Try this guide:
http://skateboard.about.com/od/boardmaintenance
/ss/ChoosingSkBoard.htm

Or watch this video:

Use a special skateboard tool to adjust the axel nuts and kingpin.The kingpins are the large nuts used to adjust the tightness of your truck turning ability

HAVE YOU CHECKED THE CHAIN, SOUNDS LIKE IT IS BROKEN

well sounds like the shocks are bad look's dont mean a thing they can look new and be bad at the same time.good luck hope i helped

Please check the power of Electricity being passed from your ht coil to the plug or change the cdi your air breather pipe must of been locked pls check

It sounds like you may have 2 problems

• Bad gas
• dpossible loose spark plug( bad compression)

Solution

dump out the gas put new in
Remove the spar plug and examine the plug if it is wet and black it is fouled
if it is white ad dry it is not getting gas

If you can replace the spark plug if not just clean it with a wire brush put back in and tighten

Finally make sure the spark plug wire is not lose

Best of luck to you