Download the HP Pole Display Windows
OPOS package (sp42198) which will install both the Windows drivers for the
device and the
OPOS drivers for the
device.
The following is the Windows
Device Manager screenshot after all the drivers are loaded for the HP USB Pole Display:
NOTE : The COM port number might be different on customer's unit.
DeviceManager.jpg
Note: The pole display driver will automatically assign the next available virtual port in the system.
HP Pole Display Setup Software UtilityDownload sp41532 - HP USB Line Display Configuration Utility from HP website.
Run the file and the Utility will come up as shown below
The COM Port would always be COM1.
PoleDisplaySetup.jpg
Change the selection to the COM port listed in the
Device Manager of the unit.
COMPort.jpg
Click on the
Welcome Message Tab and Change the Text and Click on “
Write to Pole Display”
Messages.jpg
Now the text should be displayed on the Pole Display.
×