How do you disinfect the balls in a ball pit?

on wrong site this is fixya we do not sell produsts or ship products NOTIFY THE SELLER

notify the seller or shipping company this is fixya we dont ship or sell products

I don't want to scare you but if the place that the ball pit was in doesn't take care of their ball pit then they become breeding grounds for germs. You can be proactive and contact the manager of the place you were at to find out how often they clean the ball pit to rule it out. I hope the kids feel better soon!

Some balls might have small holes in them or cracks that if completely imersed in water can become breeding grounds for mold. To be on the safe side you should never soak them, use a spray bottle to coat them in the solution to disinfect the balls.

It's not easy for anyone to claim that Ball Pits are definitely safe. There are can be potential games in many kids toys and games.
Ball Pits are great fun for kids but you should be aware of the following risks:
1. Ball Pits can be filled deeply with balls and so you can't see the bottom. if there are any sharp objects etc at the bottom, there is a risk you will miss them.
2. Its hard to clean Ball Pits and if you are in a public play area, it's possible that the Ball Pit might be a haven for bacteria.
3. There is a risk of injury as kids tend to jump really high into ball pits and arent' always sure where they will land.

A ball pit is a padded pit (usually square or rectangular) that is filled with hollow plastic balls. The aim is for kids to have fun jumping inside the pit without any worry of getting hurt.
A lot of gymboree type places have large ball pits.

On the kick start side of ur bike on the carb the should be a bolt on the carb ball loosen it off till all the water and fuel comes out. If ur bike still want run u need to take the carb off and clean all the jets.

Inside the dispensor pump cartridge is a small ball that acts like a valve; it gets stuck or gummed-up,or dirt particles may lodge against it therefore the ball does not seal the valve hole and no pumping occurs. You can disassemble the cartridge if you have the patience, or contact price pfister for a replacement. Note: the handle is not part of the replacement; the cartridge is a general part that fits many styles of decorative matching fauctes. Goodluck, Macgivor

I had the same problem and checked at the Apple store and was told to rub the scrolling ball with a alcohol prep pad. works wonderful. May have to repeat as needed.