I have a hummingbird matrix 67 gps chartplotter fish finder. It developed a problem with the screen. The outer edges are legible, but the center is damaged. Is it worth repairing. Are there any other common problems with this unit?

http://www.ebay.com/itm/Humminbird-998c-HD-SI-Combo-408720-1-GPS-Chartplotter-Fishfinder-w-Transducer-/261296103349?pt=LH_DefaultDomain_0&hash=item3cd6761fb5

you have a bad transducer.. its a direct short if its leaking anything getting way to hot

My 787c2 screen just shows lines across it does anyone know were to get a new screen for it hummingbird says they don't stock them anymore try Humminbird Fishfinder Depth Finder Humminbird GPS Chartplotters...

looking for mmc gold ma card for matrix 67 hummingbird unit one with mas of east coast and bays... and one blank for down loading soft ware. thanks [email protected]

Hi!

No problem. Here's the link to your manual!

http://www.manualnguide.com/dl/15864/

Happy Boating!

Call our Customer Service Group at 800-633-1468 and they should be able to help you.


Joby
Humminbird

It should work right out of the box. It may have trouble picking up satellites, especially if you are testing it inside your house. A lower-end unit like this isn't going to have as powerful an antenna as more expensive models, so be sure you are outside, with a clear path to outer space and it should work!

Hope this helps.

sounds like you might not be getting a full 12 volts DC to the unit. check the voltage with a volt meter,, and also check to make sure that your battery/batteries are in top shape and charging properly. ( one bad battery in a bank of many can cause voltage issues ).

c...

try holding down view then press the on button.

I have seen a suction cup for the eagle brand depth finders maybe it will fit a hummingbird