Ipad model mc763ll/a sealshield bluetooth pairing

Turn off "Notification" for the offending item , email or sports or what ever sends the message.
if you printer is Bluetooth you will have to re pair, with iPad on turn on your printer, look at IPad in settings, Bluetooth and see if your printer is listed!

Be sure to check your settings to have Bluetooth on

on your iPad go to setting-> then down to bluetooth. on your headed set Press and hold the multi-function button for 10 seconds until the indicator light turns blue. It is now in pairing mode. it should show up on your iPad, click on your headset and it should pair.

Make sure the keyboard does not have a pairing relationship with another device in the room.

If there are any devices listed on the iPad, in Bluetooth settings, tap 'I' and forget Device.

Place the keyboard in pairing mode with a 5 second depress on power from the 'off' or no power state.

Type the keys on the keyboard that the iPad wants for the pair.

Follow the instructions located here: http://www.wikihow.com/Connect-an-iPad-to-Bluetooth-Devices

check the manual...!
depends on the model - but it works with bluetooth- see a sample :
put the iPad in the slot built into the keyboard, and pair it with your iPad via Bluetooth
On your iPad, tap the Settings icon and then tap Bluetooth. Make sure Bluetooth is On.
Connect the Logitech Ultrathin Keyboard Cover i5 Logitech Support Article

Perhaps you look on this link to see you did everything right, like charging the battery, switching on and pairing. Don't forget to switch on bluetooth on your iPad. SHARKK Apple iPad Air Wireless Bluetooth Keyboard Case

Check that the keyboard's battery is working and it's on. Turn on Bluetooth on the iPad (Settings > Bluetooth). Press the keyboard Connect button. Choose the ZAGG Keyboard on the iPad, and type the code on the keyboard.
This doc describes the process: http://cfprod.zagg.com/downloads/ZAGGfolio%20instructions/ZAGGfolio%20instructions.pdf
Good luck! :)

I'm assuming Bluetooth is turned on on the ipad.

follow the keyboard instructions to put it in pairing mode.

Then in ipad settings - Bluetooth you may need to select the keyboard.

You have to have the 2 iPads basically side by side. Then you go to the bluetooth section on both. Then on each one it will come up with the name of the other iPad. The beside the name on each one it will say "not paired". Click the name on both iPads. Then it will pop up asking if you want to pair with the other iPad. Hope that helped.