I need the 4 didgit code for Yamaha AV receiver RX-V371

Blown output stage, blown fuse, speakers not plugged in etc

https://www.manualslib.com/manual/352369/Yamaha-Rx-V371.html

By your description of "light is flashing on the remote" I will assume the "function" LED on the actual remote, as the infrared (IR) LED light spectrum used to communicate with the receiver is invisible to the human eye. Let's try "simple" first. Is there something blocking the IR pickup device on the front of the RX-V371 receiver? It may be difficult to locate the pickup window and-so make sure the entire front of receiver is unobstructed. Also, IR remotes are a "line-of-sight" type device and must have an unobstructed view of the device being controlled.

if you have a coax digital out on your tv, why not use that, you have coax, optical, and hdmi inputs on your reciever, but the easiest, low cost way is the coax

Yes it will not work , Your just wasting your time trying,

you can connect Yamaha YST SW800 at the back of your receiver

( label =subwoofer )

http://uk.yamaha.com/en/products/audio-visual/speaker-systems/subwoofers/yst-sw800_black__u/?mode=model

Go Here: http://usa.yamaha.com
Create an AccountThen Go To: http://usa.yamaha.com/products/audio-visual/av-receivers-amps/rx/rx-v371_black__u/?mode=modelClick "RX-V371 Owner's Manual" it will tell you everything you need to know

Thank you for your question.


Yamaha RX-V367
http://usa.yamaha.com/products/audio-visual/av-receivers-amps/rx/rx-v367_black__u/?mode=model


Motorola DRC800
Here are a few codes to try:
0054
0030
0179
0706

i have the same problem. any answers? [email protected]

(I have the RX-V659). Because the Yamaha remote has TWO SEPARATE buttons - power ON and power OFF (standby). This problem can't be fixed. There's a code to choose power ON and another code for power OFF. But one button can't be two buttons. Bad engineering\ design by Yamaha in my opinion