How to connect mic in,mic power,ground,l out.l ret,r ret and r out

http://dlcdnet.asus.com/pub/ASUS/mb/socka/kt400/a7v8x-x/e1198_a7v8x-x.pdf


On page 28 (1-18) you have the full description of the FP audio connections.

If the user manual isn't giving you locations for those wires then they are not supported or that board is expecting a different type plug to work properly. Check the motherboard manufacturer website for a user manual download.

Here is the link to the Gigabyte site to your specific motherboard. The only place that will have those pin locations is the user manual. Not all motherboards support all chassis designs and at times modification of the connectors is required in order to get the connections. Check the User manual for the actual pin outs.

The L&R-Ret2&3 are common so only one needs fitting so for the speakers you only need to connect 3 cables. R-Out, L-Out and one return (either L of R). I'll comment back shortly on the mic pins for you.

Hi,

I've attache a picture to show you where the jumpers are located on the board, and an explaination of what gets plugged into what.

Good Luck

Thanks

Mark

try this site look a manual
http://www.intel.com/support/motherboards/desktop/d845gvsr/sb/cs-008823.htm

download manual from here :

http://www.msi.com/index.php?func=downloadfile&dno=3989&type=manual

see on page 34 :
Front Panel Audio Connector: JAUD1

Note : The odd pins are on one side and the even ones on the other side.

I hope this helps...

Mic In to pin 1; Gnd to pins 2 and 3; R Out to pin 5; Ret R to pin 6; L Out to pin 9, and Ret L to pin 10. Remove the jumpers on pins on the motherboard before placing thses wires.

If it is an internal speaker connection
SPK1: Internal speaker header Pin Signal Name
1 SPKR
2 NC
3 Ground
4 +5V
Hope this helps

clarification request:

be spcific problem like what pin and connected to the......