" Web cam , graphics not detecting"

You will have go to the Lenovo web site and down load the Win 7 drivers for your unit. Good luck

Please rate this suggestion. thanks

Download this
http://download.cnet.com/AMCap/3000-13633_4-10504734.html

Sounds like the hardware is failing to me.

Hi raghavbacha,

Installing the software for your Lenovo 3000 Y410's web cam is easy. You can do it on your own in less than 5 minutes and I can help you with that. Just simply follow the steps below:

• Go to this link to get the software directly from Lenovo's website.
• You'll be directed on a page where you can see all the drivers and software for your Lenovo 3000 Y410. Kindly look for Software.
• Underneath you'll see the web cam software for Y410 specifically for Windows Vista 32bit Operating System.
  
• The name of the software is EasyCapture, kindly click on that.
• Afterwards, click on download here.
• Wait until the donwload is complete, install EasyCapture.
• When the installation is complete you'll need to restart your computer.

Before launching the software for your web cam just make sure that camera is enabled so press Fn + Esc. An icon of a camera will appear on the lower right side of your screen, if the one that appeared has a slash at middle of the camera it means camera was disabled so make sure to press Fn + Esc once again.

Hope this helps.

Thank you for using Fixya.

Hello there,
Here's the download link, pick one that matched to your Operating System (XP/Vista)

Camera driver for Windows Vista - 3000 C200, N100
PC Camera Driver for Windows XP - 3000 C200, N100

hope it help
regards

Yeah this series of Lenovo's 3000 is using a webcam of another manufacturer. So Vista can't detect it because by default Vista doesn't have its driver. So I recommend you to go to Lenovo's website & then go to DRIVERS & DOWNLOAD section...and then enter your model number..

After that it will display u whole list of drivers available for this laptop.
And then you can download your webcam's driver for VISTA 32 BIT...
Install that and it will surely fix your problem.

Rate the solution if it was helpful to you...

With Regrards,
Shyny

You cannot grab the drivers from one computer and copy it to another computer, you need to know which files and also there would be some register entries.
If you have the driver disk, then you can use the same disk to install the driver onto another computer, provided they are identical.

Go to the IBM/Lenovo WEB site - support/download page and download the latest Windows Vista device drivers for your model laptop,
Use this link :-
http://www.ibm.com/products/finder/us/finders?pg=ddfinder&cm_re=other-_-suprcn-_-download

After you download the driver file, click on this file and it will unzip/expand the drivers and copies these files to the hard drive in c:drivers... take a note of the folder it has created to store the driver files and then go to this folder and run the SETUP file to install the driver.

if you did a fresh install you don't have any of the drivers you need, so you'll want to go to : http://www-307.ibm.com/pc/support/site.wss/product.do?subcategoryind=0&familyind=437897&brandind=10&doccategoryind=0&modelind=0&doctypeind=9&validate=true&partnumberind=0&sitestyle=lenovo&template=/productpage/landingpages/productPageLandingPage.vm&operatingsystemind=343518&machineind=438304
and pick up the drivers you want, you can ctrl+f with the title to find specific things

try to boot ur laptop with disc manager cd or win XP.
if doesnt works then try win 98 cd and delete ur C:/ partiton and install new vista