Remote control of Bose WaveMusicSystem

Go through the BOSE manual to see if another channel can be chosen to control the system. If not, try and locate them farther apart and shield the remote with your hand to avoid signal from getting to the unwanted device.

Check this site to get setup codes and model number of a suited universal remote control. It has many details you want. Check this site too.

The Bose Wave Radio and Wave Music System use different IR codes. It is no other reason other than Bose made the remotes incompatible. This is often done to prevent interferance with systems that may be close to each other.

make sure there is nothing blocking the signal to your unit.tv remote dvd other cd players etc..or u mite have 2 get a cd cleaner an get it done.

I found remotes on this page that have good reviews.
http://www.ebay.com/sch/dr_bose_boo_boo_fixer/m.html?_nkw=&_armrs=1&_ipg=&_from=

Hi,
Our bose wave system stopped working also. The remote wouldn't work, it wouldn't turn off nothing. So finally we re-set it by clicking the button on the power strip it was plugged into.
It then worked! we had a power glitch a few weeks ago and think that had something to do with it. I hope this helped, and helps others!
Annie

• Reset the system by disconnecting the power cord from the wall for one minute, then plug it back in
  
  
• Make sure you’re pointing the remote directly at your Wave® music system. If the system is placed above table-top height, be sure to angle the remote upward while pointing
  
  
• Check for possible sources of interference with the remote’s infrared (IR) signal, such as bright lights or solar glare off of a window. Make sure nothing is blocking the path of the signal from the remote to the Wave® music system display. The remote will not work properly if there is something directly in front of the display
  
  
• Wipe off the small clear lens on the front end of the remote
  
  
• The remote is designed to work within 20' of the system. Greater distance may cause intermittent response
  

It will work as a manually-operated AUX input, but since there was no remote for the original system so that function won't be available.

We have a Bose Acoustic Wave Audio System II, and our remote uses nickel metal-hydride batteries CR2032.

We have a Bose Acoustic Wave Audio System II, and our remote uses a nickel-metal hydride battery CR2032.