Question about Washing Machines
Open the draw. Grip it tightly and pull it out. clean the draw and clean the dispenser housing. Usually leaks due to powder etc getting stuck under dispenser draw causing water to bridge across and leak under draw. Also use a pipe cleaner or cable tie to clear any blocked holes in the dispenser.
Posted on Dec 02, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
It sounds like the washer is not draining properly.
Remove lower rear cover of washer, locate and remove the large black hose fastened to bottom of tub.
remove plastic filter inside hose, and clean same.
Refit filter and hose, making sure it is on properly.
Be careful when you remove the hose, as there will be water in there.
As an extra precaution, remove soap draw,and thoroughly clean all parts, particularly,the conditioner parts
Please rate my fixya solution.
Posted on Feb 02, 2009
i would 1st look to make sure the drain hose is not loose or broken. be sure it is staying in the drain pipe in the wall.it could be a cracked housing on your pump. hope this helps
Posted on Jul 11, 2009
Tips for a great answer:
Feb 04, 2013 | Hotpoint Washing Machines
Dec 18, 2010 | Hotpoint Aquarius WF000 Front Load Washer
Dec 17, 2010 | Hotpoint Ultima WF860 Front Load Washer
May 09, 2010 | Hotpoint Aquarius WF210 Front Load Washer
Sep 28, 2009 | Kenmore Washing Machines
Feb 01, 2009 | Hotpoint Ultima WF860 Front Load Washer
May 24, 2007 | Hotpoint WF430 Front Load Washer
Sep 17, 2019 | Samsung Washing Machines
133 people viewed this question
Usually answered in minutes!