I am setting up a KX-TA824 phone system and I am wanting to set it up that after so long during the day time that it automatically goes to the Auto Attend. Is their any way to do this?

here is link to manual copy and paste
https://www.ask-tsc.com/pdf/KX-TA824.Operating%20Manual.pdf

The batteries are defective, your local supermarket should have rechargeable batteries or try an online auction site, look for the highest 'mah rating you can get something like 2800mah, the higher the rating generally the longer the battery will hold charge

First assing the flexible ringing day, night, lunch in programs 408 to 410, the assign the delay ringing for the extensions you want in 411 to 413.

hrgr

No. An 824 is analog and the 76xx is digital that works only on the TDA/TDE/NCP systems.

Older analog phones (70xx,71xx,73xx and 75xx) will work, and possibly some of the old 616 and 1232 sets, as well as a 308xx 3-line set.

Carl

From the phone connected to jack 01, press PROGRAM and dial 0YYMMDDWHHMMA STORE
Where W is day of the week with Sunday-Saturday being 0-6 and A=0 for AM or 1 for PM

Carl

It's automatic. Press the SP Phone button.

My headset is a TCA-60 and it works in all systems on all Panasonic phones.

Carl

And??? What's the problem? My DISA is set for 1s on the first page and it never rings a phone. If you want it to answer the outside line on the first ring, you'll have to turn OFF Caller-ID. Now it will answer right after the first ring, but you lose CID logging.

On my working system, the DISA 6.1 section is with AA and 1 second, and 6.2 the first two timers are 3 and 5 seconds. In 9.1 you can uncheck CID but I don't recommend it.

Carl

For anyone looking for an answer, it is covered in more detail here
http://members4.boardhost.com/ablecomm/msg/1240472611.html

Carl