I just bought a f20 speedometer and my little brother destroyed the manual instruction book so i can't set it up i need to find one i need the whole thing and can't find it online

Search the internet for:

Make + Model + the word Manual

or contact manufacturer support.

..

In the installation manual for this model ... pages 10-12 ... (see link below) there is an explanation that might help you clear the F20. After I did some searching ... there appears to be no physical pause and cancel buttons on your machine. You have to go in to control set up by pressing existing buttons in a certain order. I admit it is confusing

Whirlpool 3LCHW9100WQ Installation Instructions Manual Complete...

The best I could tell ... press the "WOOLENS" button enough times to get to code 6 ... then press the "DELICATES/KNITS" button for at least 1 second ... which takes you to diagnostics.
If the F20 code does not clear, then the problem still exists and a whole bunch of things can cause the "slow fill" problem.
Helpful?
Good luck on your troubleshooting!

push + - together a few seconds little dot in center will flash push + to adjust leave for 30 seconds clock should be set

Please follow the link below

http://www.brother-usa.com/ModelDocuments/Consumer/Users%20Manual/UM_MFC_4350_4650_6650MC_7750_EN_102.PDF

Try this manual:

Brother Sewing Machines


Note: The link will open an online manual in pdf; size is 1.52MB.

I bought the same, but managed to download the manual from navman. Try again friend.

Did an obsessive search of this problem and found this: "Right Button" . . . click to display the "DST" (distance) than hold the "LEFT Button" for 2 seconds. YEAH!! Reset trip ONLY!! This problem is simply an error in the instruction manual. ~G~

I have one too, the manual is incorrect. Only hold the LEFT side for 3 seconds, and the info will reset.if you hold BOTH sides, the whole speedometer resets, making you re-enter all the info again such as weight, time wheel size, etc... ALOT of people are having this same problem.


http://www.walmart.com/catalog/allReviews.do?product_id=10400636

Just hold the LEFT side only and you will be all set.

Hi,

All manuals for your printer are available for download in a variety of languages from this site:

http://welcome.solutions.brother.com/bsc/public/us/ca/en/doc/manual_index.html?reg=us&c=ca&lang=en&prod=mfc420cn_us&type2=-1&flang=all&dlid=

Hope this helps FixYa,

Chris

Go to www.brother-usa.com. You can download the entire manual. On the Brother site, go to DOWNLOAD MANUALS AND PRODUCT DOCUMENTATION, and follow the instructions for downloading what you need.