Kenmore air cleaner model 437.83233 manual. - Kenmore Air Purifiers

Hello, it is this, here is the page to get your manual.
Kenmore HEPA 152.8525 Air Cleaner User Manual http://homeappliance.manualsonline.com/search.html?q=Kenmore%20HEPA%20152.8525%20Air%20Cleaner%20User%20Manual

Since it's a Kenmore unit, you can find the Owner's Manual online at a Sears Parts Direct.

Thanks for choosing FixYa.

According to the Owners Manual, here's what you need to do,

1.Turn the air cleaner OFF and unplug it from the power outlet.

2. Carefully lay the unit down on a flat surface with the Front Grille facing up.

3. Gently push in on Release Buttons on both sides of the unit, pull Front Grille out and away.

4. Remove and discard used HEPA filter.

5. Remove any plastic protective wrapping and from the new HEPA filter.

6. Set new HEPA filter into the air cleaner.

7. Install the Front Grille by engaging its tabs into the bottom slots on the unit. Then swing grille up and gently push in top to snap into place.

8.Turn the Air Cleaner upright and plug it into an outlet for
operation.

Hope this helped you. Please let me know. Thanks

Since it's a Kenmore, you can get one from Sears Parts Central. Either online or by phone. Make sure you have your Model Number, handy.

http://www.managemylife.com/mmh/owner_manuals/19013/KENMORE-Air-Cleaner-L0801124

Hi, are you sure about amazon?! I found your part there for 15$ (less than your budget of 25-30$). Take a look again here:
Amazon com kenmore charcoal filter. I hope this was helpful. Cheers

The manual is listed under the 85500 model but the manual is for the 85500 and 85501 models.

http://www.managemyhome.com/mmh/lis_pdf/OWNM/L0806244.pdf

I have an kenmore air purifier and cannot locate where to find a replacement filter or manual for it? Can you help. It is Model # D42M32957

I just bought the same model and also have the smell. My previous one did not so I returned the first unit and the second units smells the same. I called Sears Customer Support and they told me that it is probably due to the factory smoke test they do on each unit. He said let it run for a few days and it should dissapate. I went a step further and am trying a new filter and if this works he said call the store and they will get me a new filter.

http://www.filterqueen.com/pdf/defender.pdf hope this helps :)