I have the above gas range. When cleaning it, I replaced the knobs, and to my surprise, all 3 of the electronic ignitors starting to flicker. I've turned off the circuit breaker, and turned it back on...still all three igniters come one. There is no gas coming out of any burner...don't know what to do!
Sounds like you have shorted out the ignitor module and you may need to replace it. Electric gas igniters sometimes get stuck in one position causing a clicking sound. The clicking sound that you hear is the electric arc that is pulsing from the igniter conductor (wire) to ground (the gas burner). It receives power from the electrical outlet that the stove is plugged into. Hope this helps.
960 views
Usually answered in minutes!
After cleaning under the grill,with a wet sponge, all four ignitors turned on, with no gas and all knobs in off position. I'm thinking the spark module became wet and is shorting so I'm turning off the range top at the circuit breaker and hoping for the best in the AM.
I've already tried to burn off the moisture by turning on the burners but that had no effect.
×