Mcafee not letting me go onto the enternet i disconnect it then i can go on line also having problems installing my wirless printer

Your message does not qualify as a question or query for a problem, try somewhere else

Here is a great tutorial to Connect and troubleshhot your Xbox to a wireless network.
If you need more help post back! Thumbs and testimonial are welcome!

Whenever this problem comes up in the future and the printer is not showing in the control panel,you need not uninstall the whole printer s/w,but instead you can insert the CD and then click on add a device,it sometimes happens that printers take a dynamic IP address and do not show up.f you want further support you can avail free online technical support on http://tinyurl.com/m7ghqz

Hi,
Have you checked in your device manager to make sure your PC wireless card drivers are installed correctly?

Let me know if you need further assistance in this regard.
Best wishes,
Graemevm

It sounds like you have a bad charge corona.

Mcafee should have a built in firewall. Have you tried to turn off there firewall? If not then give it a shot. Also you can unistall Mcafee and then reinstall it after the printer is installed

Do you mean install the printer drivers from the internet using Internet Explorer? What operating system is on your computer?

Here's a link to the drivers for your printer:

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=357&modelid=10236

Please let me know if this is what you need and if it solved your problem. Thank you, Binary Bob

To avoid conflicts, you should uninstall any other security software you have now, either through its own uninstall or by going to the Control Panel "Add and Remove Programs".

Install the new software. Run its update program immediately if it didn't do it automatically during the install process.