Health & Beauty Logo

Related Topics:

A
Anonymous Posted on Sep 18, 2013

I have a Invacare zoom 200 scooter,it slows down and almost comes to a stop then lurches forward very fast,it also makes a chattering noise backing up.

5 Related Answers

Anonymous

  • 32 Answers
  • Posted on Apr 03, 2009

SOURCE: Reverse on 3-Wheel scooter won't work.

throttle pot, cheap fix

Ad

Anonymous

  • 13 Answers
  • Posted on Jun 18, 2009

SOURCE: golden companion 2 scooter moves slow in reverse

i would suggest there is either a loose connection or the speed control has failed, the scooter will still run but at a slow speed, the part is fairly standard in all scooters. if i can be any furthur assitance please email me rick @ lxrixta.co.uk (remove the spaces)

Anonymous

  • 86 Answers
  • Posted on Feb 20, 2010

SOURCE: scooter stops then jumps forward

mait be problem with moter

Anonymous

  • 61 Answers
  • Posted on Mar 29, 2010

SOURCE: My Scooter slows waaaay down to almost stop, then

Sounds like a throttle pot fault (the part that the throttle lever is attached to). This would need testing at a dealer or with a volt meter (set to ohm's) and if found to be faulty, will need replacing. If you test it yourself, there is usually a number on the top of the pot, usually 5k or 20k and this is what you need to set your meter too. Place the probes from the volt meter, black onto the centre wire and red onto either of the other wires (there should be 3) and slowly press the throttle lever first forward, then reverse, and constantly keep an eye on the reading from the volt meter. The reading should go up to approx. the number on the top of the pot, i.e. a 5k pot should read about 4.9 to 5.1 ish on the meter. If this number fluctuates up or down quite rapidly while the lever is held in a static position, it will indicate a faulty pot. This is in fact a common fault with nearly all makes and models of scooter and usually a fairly cheap and quick repair.

Anonymous

  • 1970 Answers
  • Posted on Jun 23, 2010

SOURCE: I have an invacare scooter that doesn't work. Can

mcdevito75 here, It could be the battery--ies need re-charge or replacement, online at Invacare.com they can help out, or almost any Medical Supply store in your area.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a pronto M61. Forward speed is very slow even when adjusted to higher speeds. Turning speed increases normally. Is there a problem in the joystick?

Has this chair got power raiser for seat? if so check it is fully down or check down micro switch. These will not go fast with the seat raised. A safety option built in.
0helpful
1answer

Invacare meteor, keeps slowing down, then speeds up again, can you help.

usual cause of this is the throttle (wig-wag ) controll potentiometer has worn out.to test put the scooter against a wall and get a freind to lift up the rear of the scooter and put 2 large blocks of wood underneath it so the back wheels can rotate
carefully advance the throttle 1/2 way then with wheels turning.keep in same position and gently move the throttle lever up and down .if there is a lot of play and the speed varies drasticaly then pot replacement reqd .you can get a dealer to order the correct one or get one off the internett but when fittinf if thr pot is not set to exact center with multimeter scooter will not move and produce off center error code
0helpful
1answer

Go go traveller mobility scooter lurches forward when finger is released off forward control lever. mum has problems getting it to move forwards smoothly and slowly without it suddenly moving forwards...

That lever is attached to a pot. Pots have this nasty habit of oxidizing. You can either replace it or get some CRC QD Contact Cleaner. Wash it down trying to get as much cleaner into the pot as you can. These pots are normally not sealed find a little hole and spay it there. While your in the control head use the cleaner to clean anything you find in there. Stall having problems contact me.
1helpful
1answer

My Lynx L4 4-Wheel scooter green light flashing but it said it is charge it wont go forward

the green flashing light indicates an error with the scooter. Count the number of flashes 4 flashes pause 4 flashes pause etc and your manual should give you the meaning of the flashes Check to make sure that you are not in freewheel move the lever at the back of the scooter up and down a few times and make sure you leave it in drive mode turn on the power and see if the light stops flashing and the scooter will operate correctly Hope this helps
0helpful
1answer

Blinking charge light on Invacare Zoom 300 scooter

Can you try another charger ?

Is it a onboard charger ? if so they do go wrong, Are they supply MK batteries ?

Check the leads from the charger connection socket to the motor controller board.

Regards
GeWiz.
Not finding what you are looking for?

121 views

Ask a Question

Usually answered in minutes!

Top Invacare Supply Group Health & Beauty Experts

Rob Hill
Rob Hill

Level 3 Expert

1480 Answers

john h

Level 3 Expert

29494 Answers

Steve Pack
Steve Pack

Level 3 Expert

7128 Answers

Are you an Invacare Supply Group Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...