Status light stays red no tv no power light

Question edited for clarity, your television is 'Nordmende', not 'Norfmende'.

Time for a new one, but try the power reset first as mentioned here.

The standby light on my nordmende tv keeps flashing

JustAnswer https://www.justanswer.com > TV Problems
Sep 27, 2012 - Unfortunately, the symptoms you are experiencing (flashing power/status light, tv won't power on) are generally symptomatic of an internal ...
1 answer · Top answer: p0llinate : Hello, and welcome to justanswer, a pay site for expert technical help. My ...

How to fix my nordmende tv as blue light is flashing and ...

Ask Me Fast https://www.askmefast.com > How_to_fix_my_nordm...
Its the power supply board, capacitor(s) have gone. Solder on new or replace board. source: 26" lowry tv red and blue standby light flashing and tv wont turn on?

• 
  

  My nordmende tv model nmh077fhd blue light is flashing ...

  https://www.askmefast.com > My_nordmende_tv_mo...
  Normende tv red light wont come on Nordmende tv blue light flashing Nordmende ... said: nope. will turn on and work fine until the screen dims, goes black.

replace lamp if lamp is ok replace color wheel

it have short in some board have to checked by some professional.

Indicator Lights:
1.Headset Status Headset Indicator Light
2.Powering on Steady blue, then intermittent flashes
(changes to standby mode)
3.Powering off Red appears and goes off
4.Standby Blue intermittent flashes
5.Charging battery Red solid light. Light indicator turns off when
battery is fully charged and headset is off.
6.Low battery Triple red flashes
7.Pairing mode Blue/red alternating flashes
8.Missed call Purple flashes. Press the call control button
to cancel flashing light.
9.Incoming call Triple blue flashes when ringing.
Power on and off:
1.Turn on the headset Press and hold the call control button until the
indicator glows blue. You will hear ascending
tones.
2.Turn off the headset Press and hold the call control button until the
indicator glows red. You will hear descending
tones. When power is off, indicator stays off.
If none of this is helpful then it may be that your battery is dead, if that is the case then you will need to replace the whole headset. The battery's are not replaceable.

Good luck from Headsets Direct!

Replace the Lamp P/N 915PO20010 if it has never been replaced.
Mats Electronics has them for $99.00 1-800-628-1118

Once the status light blinks 3 times, this is an indication that there's a problem with the lamp. The lamp may need a replacement.

If you replace the lamp, but get the same problem, check the inverter board.

If you're not sure where the inverter board is, then you may need to contact a pro for your safety.

Good luck and have a good evening!

Plantronics Explorer 320
Indicator lights: Blue Light Flashing.

TheBlue light flashing indicates that your headset is working normally. There is no way to turn it off without turning off your headset.

Headset Status Headset Indicator Light

Powering on: Blue light flashes.

Powering off: Red appears and goes off.

Charging battery: Red solid light.

Low battery Red flashes.

Pairing mode: Blue/red flashes for 120 seconds.

Missed call: Purple flashes. Double press the call control button to cancel.

Ringing: Purple flashes. Briefly press call control button to answer the call. Press call control button for 2 seconds to reject the call.

Here's the link to your user guide:
http://www.retrevo.com/d/df/explorer300series_en.pdf?doc=178a4266e3e80dd257e740b75b59b3ad&ts=1265516774335

If you found this information helpful, please give me a big thumbs up when you rate my answer. Thanks!

lamp door has to be closed

Hi,
have you check the filter?

have good tec replace if nessary, The inverter module