Wireless driver elitegroup - EliteGroup ECS G900 Notebook

Firstly, are you sure you have a wireless card installed in your motherboard?If you have then it'll all be turned on and off using Windows (I'm assuming that's what you're running!)You'll have to find the wireless utility driver software that you installed along with the card, (it'll be in 'programs' ) then you can turn it on from there.Regards,nicam49

Go here: http://www.driverstock.com/EliteGroup-P4VMM2-driver-download/25-9-3830/index.html

I located a web page for you with all Elitegroup drivers,you'll need to do some digging,what your looking for should be there..
Hope it helps good luck
http://www.nodevice.com/driver/company/Elitegroup.html

Try this CLICK HERE -- http://www.ecs.com.tw/ECSWebSite/Downloads/ProductsDetail_Download.aspx?detailid=313&DetailName=New&DetailDesc=&CategoryID=3&MenuID=6&LanID=0

Perhaps this link will help.
http://www.nodevice.com/driver/536/get64149.html

Since you have a linksys card, you can check out this website --> http://www.linksysbycisco.com/US/en/support?Signin_Target=Redirect_Page to download the drivers for your card. All you need to do is enter the model number or serial number of the wireless card to get the necessary drivers for it. Once you download the drivers, make sure to read the instructions that come bundled with them. Let me know if you need any more assistance with this.

Serge C.

download driverscanner 2009 and enjoy downloading and updating your drivers

Here is a link for your motherboard:

http://www.driverstock.com/EliteGroup-P4VMM2-driver-download/25-9-3830/index.html

okay try this site for the download http://drivers.softpedia.com/progDownload/ECS-ELITEGROUP-MB694A-Bios-20e-Download-3473.html

instead of using your laptops windows zero wireless configuration, you can purchase a seperate wireless pcmcia card or usb dongle type that uses the security you require within the relevant company's software & drivers.