Set clock on keh p2030 - Pioneer KEH-P2030 Cassette Player

alot of clocks will not program until after you turn the radio off

The solution is very simple which I too struggled initially. First **** the CD if any in the system. Then press SRC button in lower left button till it displays clock by pressing it for 2-3 secon ds or 2-3 times as using it you change it to CD and Radio. When clock is displayed press Audio button on top right for 2-3 seconds and then hour will blink. Use Up/Down arrow as por your need to set hour. Else use right arrow to shift to seconds and as it blinks use UP/DOWN arrow to change. After you are set press SRC button again and U R DONE!!!!

go to this link for the user manual on PDF, then go to page 14 for clock setting procedure.

http://www.pioneerelectronics.com/pio/pe/images/portal/cit_11221/155246906DEH-2700%20OPERATION%20MANUAL.pdf

I found a manual for my super tuner at http://audio.manualsonline.com/manuals/mfg/pioneer/pioneer_cd_player_product_list.html
No tricks, there's an offer but click skip and get your manual.

turn off power to unit wait 5sec to shut off hold the source button down than press and hold down the function or f button till beep and scroll threw features by pressing function or f button and clock should be located there turn power back on after setting by pressing the source button and time should be set on unit
hope this helped

cut the power off to the radio. They hold the clock button in for a few seconds. the clock will show up, and should be blinkimg.Us the tuner button to set the hours, then hit the volumn button. This should switch it to the minuntes. when time is set. Push clock button again, and it should be set.

1) Hold the source button until the radio shuts off.
2) Hold clock button until clock is displayed.
3) Use < and > buttons to move from hours to min.
4) Use volume up and down to adjust time.
5) Press band button when finished.
6) Press source button to turn radio on.

http://www.pioneerelectronics.com/PUSA/Support/CarAudioVideo/Other/Cassette+Receivers/ci.KEH-P2030.Support

Usually, you can tune it to the station you want, push and hold down the numbered buttons

Display the time by pressing the Clock button below the 1+2

Adjust the hour by holding Clock and press 1 as many times as necessary.

Adjust the minute by holding Clock and press 2 as many times as necessary. Seconds start at 0 when you release the clock button.