Hi I own a Bosch SGS45C02G Full DW which is 11 months old. I now have a problem where the "Check water supply" display lights up when I turn the dishwasher on. This first appreared when there was 49 minutes left. I have taking all the pipes apart to ensure there is no blockage & happy with that. Also check there were no kinks. The washing works & the dishwasher is connected to the same water supply, so I assume no issues there. Is there anything else I should check? Appreciate your help Kind Regards Gerry
SOURCE: bosch shv55mo3gb
use this link then click on insruction manual download type in the model number remember 0 is a number.I know that sounds condesending but i forgot. I used the manual with the ending aus.
http://www.bshappliancecare.com/Bosch/Bosch_dishwasher_manual.html
SOURCE: water not pumped out of dishwasher
To cut a long story short, lower the drain pipe as close to the floor as you can. Some dish washers have a non return rubber which holds the water in the cabinet until asked to drain.Meaning water wont just flow out with pipe being low.(Im assuming the drain pump is operating correctly).Check if this alteration makes any difference.
SOURCE: Just installed bosch exxcel and light on saying
Best Solution
posted on Jan 17, 2010
Nzimpofu
Rank: Apprentice
Rating: 100%, 1 votes
Have been struggling with the same problem. Tipping the machine backwards worked. Many thanks.
Was this helpful?
Yes
No2 people thought this was helpful
Solution #2
posted on Jan 11, 2010
klaudiatombo
Rank: Apprentice
Rating: 100%, 2 votes
I solved the problem, by tipping the dishwasher back about 45degrees, I think this re-adjusted the flood sensor, and it is now working fine. Thank you
421 views
Usually answered in minutes!
×