Question about Frigidaire Freezers

1 Answer

Error code 8 - Frigidaire Freezers

Posted by on

Ad

1 Answer

  • Official Brand Answer
  • 4,342 Answers

Good Afternoon Glenda, thank you for your inquiry!

Is it possible that the error code is missing characters? According to my research 8 is not a valid error code. The number 8 is more like a temperature setting, however to be certain, let's try resetting the appliance. It is important to wait roughly ten minutes and then turn the unit on. Set the correct temperature and please allow 24 hours for the temperature to stabilize. The error code should clear and the unit resume to normal operations. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if the unit's status has changed successfully.

Best regards!

Posted on Sep 11, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our fridge compressor won't run after a power outage, can it be reset?


compressors use a small start / run capacitor to start the compressor
modern fridges do not like spikes from power outages and many power boards and electronic components fail because of this and I am inclined top use a surge protector before the fridge cord plug
I went google and typed in --fault code 88-88 for samsung fridge model rf26aewp and the first site up is error codes /messages/ blinking
the site is support-us.samsung>popup>iframe
there is a detailed answer there with a list of fault codes as well and what they indicate
there are other sites that also refer to the fault that you have

Dec 15, 2015 | Samsung RF267AEWP - 26 cu. ft. French Door...

1 Answer

SAMSUNG REFRIGERATOR MODEL RS267 ERROR CODE 5E


Error code 5 E : Ice Maker Function Error - Ice-ejector and level failed three times or more. May simply be a trapped piece of ice which is not too rare a problem especially if the freezer door is left open too long.The ice pieces will stick to each other. It may dislodge itself or if the problem persists you may have to de-freeze it ( letting the freezer defrost over night.)

Jun 27, 2014 | Samsung RS267TDRS - 26 cu. ft. Side by...

1 Answer

E7 error code


You need the owners manual for that specific machine to get the listing of its error codes.

Dec 20, 2013 | Carrier Freezers

1 Answer

Kelvinator Problems I have a Kelvinator washer


google that error code

If you need further help, I’m available over the phone at https://www.6ya.com/expert/rick_4ed9a6c8e57209e6

Oct 06, 2013 | Freezers

1 Answer

Everest freezer esf1 error 3


I think that code is a mechanical error code. Not sure. Call the mfr and see what they say. You can google the code and model number and perhaps get it there.

Feb 25, 2013 | Everest Refrigeration Freezers

1 Answer

Error code FF on LFUH2157lm2


Follow through with google punch in code and model.

Feb 09, 2013 | Frigidaire 20.3 Cu. Ft. Frost-Free Upright...

3 Answers

Samsung RSA1WTMH i just blew my fusebox and my fridge freezer just flashing 1 led light


Hi,
hope the following helps you, I had a similar problem with my RSH1 and it took me a few hours searching online before I found the following.
"Hi, I have it on good authority that this is the system check for Samsungs (RS21, SRS20, etc) during normal operation, is to hold the top two buttons down, just until display flashes - this will reset the electronics.
Secondly, if the top two buttons are held down for longer (8 seconds) the display goes blank and will show any error messages in the form of DASHES
I have experimented with unplugging air or frost probes - and the error code you get -on a blank screen is different parts of the last digit lighting up.
Example: when i disconnect the fridge air-probe, shut both doors, hold down top buttons around display - The SIDE of the last "8" digit lights up ! ...strange but true.
But, I need to know what it means when the BOTTOM of the "8" digit lights up"

I am still trying to find a list of the error codes the lines refer to but so far my unit is working fine.
Angus

Sep 21, 2010 | Freezers

Not finding what you are looking for?
Freezers Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Freezers Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Dennis Boxerman

Level 3 Expert

1300 Answers

Bruce Denton

Level 2 Expert

273 Answers

Are you a Frigidaire Freezer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...