My instamatic 101 will not turn on automatically anymore, but turns on manually, but it turns off automatically, thanks for your help

I have no idea if this would work but worth a try...put a twist in the belt when replacing it.

problem in the cancelling system under the steering wheel
could be a broken spring , pins or plastic cam block
remove the wheel and check for a fault

Usaly means that drive rubber bands have gone bad, Very hard parts to find anymore.

Hi Stanley - does this youtube video help? http://www.youtube.com/watch?v=EcALdbbCnSk
If not, let me know and we can investigate further.
Regards,
Justin.

Order new trippers:
http://waterheatertimer.org/Intermatic-timers-and-manuals.html#T100

http://waterheatertimer.org/How-to-troubleshoot-Intermatic-timer.html

Gene
hh

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

try googling Kodak Instamatic owners manual . You may need the model number but you should beable to find and download the manual

Hi - the timer motor which turns the knob around is most likely to be faulty, unfortunately you will have to replace the timer - comes as a complete unit.
Cheers

you must turn it on and off manually

I have a Kodak Instamatic M70 Super 8 movie projector. How can I stop the film from continously jumping? I have adjusted every nob and looked inside to find nothing out of the ordinary.

I think this is fixable by customer level programming. You're going to turn off the Automatic Time Switching (101) and make sure the sytsem is in night mode by pushing the INFO button.

From the main console, press PROG **1234 and dial 101 for system program. Press SEL and ENTER and EXIT as this changes Auto Switching to MANUAL. Now, if the system is in nights, as it should be, you don't have to do anything else until you get back. If it isn't, dial *7801 on the intercom to force it into night mode and you're done!

Carl