I need to do a short course on corporat employment .working safety. patien care and manual handling and when i try and get on the site to do it its telling me l need to enale my pop ups

show room people are sales people and and are employed to make sales
best information is to have the fault codes read by an accredited service shop and decide what to do from that advice
I take it that the 28 lkms is the fuel economy and it should be better or it is limited to 28 klms /hr
both indicate a sensor problem and having the fault codes read would reveal where the problem is occurring
any way a simple compression test will reveal the condition of the bore and motor

SSSTS course is basically health and safety course that enables you to take best decision at crucial condition. It's a five days course that provide you knowledge of current health and safety laws and that you are suitable for the job.

Goes for

SSSTS Site Supervisors Safety Training Scheme

Get mor information at
SSSTS Site Supervisors Safety Training Scheme Courses

"Every clerk, agent, or servant of any person who fraudulently appropriates to his own use, or secretes with a fraudulent intent to appropriate to his own use, any property of another which has come into his control or care by virtue of his employment as such clerk, agent, or servant, is guilty of embezzlement".

This means such a person fraudulently appropriated property of another to his or her own use that came into his control or care by virtue of his employment as such clerk, agent, or servant.

So if you work for or serve someone or some company, and in the course of such employment you steal and hide, for your own use, someone else's belongings such as money, you have committed embezzlement.

If the key is really lost can probably open the top of the unit and see if there are two wires to short where it runs to the key switch. Of course you have to be careful, I don't hold the key anyway.