No power Sony Handycam Model CCD-FX620

Help here. Compare specs, but why not just buy the right one.

420
https://www.google.com/search?q=SONY+CCD+FX420+charger

620
https://www.google.com/search?q=SONY+CCD+FX620+charger

..

The CR2025 is to hold memory, but it may also run the operating system memory. All the batteries need to be good. Also try cleaning the main battery contacts and those inside the camera.

Check that there is power coming out of the mains adapter and the level battery power using a multimeter. After 10 years the battery will likely be defective.

Pry with a toothpick?

The battery is located on the side case where the LCD closes. To remove the battery just push down a little and pull out. Insert the new battery with the positive + side facing out. Replacement battery should be CR2025 or DL2025.

However, this battery is only for the date and time. It does not affect the operation of your camcorder. It sounds like you have an issue with either your lens or your main board. If the camcorder has been sitting unused for a long time, sometimes the surface mount capacitors will start leaking onto the main board. Still a good chance that it is a problem with your lens though. Your iris may be stuck in the closed position or the imager could be bad. Any of these problems would need to be repaired by an experienced technician. The only thing that you can try to do yourself is to "bump" the bottom of the camcorder (under the lens and around your lens) with the palm of your hand to see if you can get the iris to open up.

Hope this helps you.
www.austintelstarservices.com

if you are willing to use a "non-Sony" battery, here are a couple of links to where you can purchase them online

http://www.batteries.com/digital-cameras/sony/handycam-ccd-tr910-battery_R-415964-200458.html

http://www.amazon.com/Sony-CCD-TR910-Camcorder-Battery-Lithium-Ion/dp/B00301OHIC

Hope this helps you
www.austintelstarservices.com

Put your camera on charge with it's charger you got with it, charge it for at least 2 hrs and the power will be enough to get tape out.

This manual is on the Sony site:
http://esupport.sony.com/US/perl/model-find.pl?mdl=ccd-tr93&PRODTYPE=33,32,63,71,7,102,26,80,72,44,55,27,74,84,57,61,103,89,10,35,78,48,77,29,50,39,64,58,12,41,81,52,60,66,101,45,73,76,86,62,54,67,70,68,17,2,1,88,100,82,25,28,83,59,69,49,24,104,53,79,42,22,46,13,6,85,36,3,51,9,47,38,4,34,37,43,5

I have a CCD-TR93 with the original charger/power supply. My camera is broken but the charger is fine. Make me an offer.
Steve
[email protected]

If no error codes are displayed it is most likely dirty heads and guides, and moisture.

Go to any Sony dealer ask for NP-33 battery pack for your CAM
Cheers

1. I removed the battery. 2. With the power switch On position and holding the tape ejected I inserted the battery back on & it ejected the stuck tape.