Does not diffuse - Young Living TheraPro Premium Diffuser

Nowadays most of the people use the diffuser for dispersing aroma in room, car, and office premises. As you also looking for the best diffuser for doing the same then I would suggest you to just take a look at Oil Diffusers. This is one of the best websites where you can find all types of diffusers such as car diffuser, jewelry diffuser, room diffusers, and ultrasonic diffuser. I also purchase the ultrasonic diffuser from this website, they provide me the best quality of diffuser at an affordable price. You can also take the best diffuser from here.

make your own, check link below press the helpful button
50 Essential Oil Recipes You ve Got To Try In Your Diffuser

Take the Diffuser off and run it if the impeller turns then might be tightening the Diffuser too much, it just needs to not move, doesnt really need a super waterproof seal or anything like that. If it still doesnt turn with the Diffuser off it might have locked up when replacing the Impeller, you can try to turn the impeller manually or remove the cover plate on the back of the moter and turn the shaft manually back there. OOoorr you broke it

I had the same Qustion and found yours so I experimented and after you turn it on push the button and keep it held in until the light turns off!! Mine has the light off now!!!

Did you find a solution? I just received mine and have the same issue.

You are correct this box that is in the upper left corner of the fridgerator towards the rear of the machine is actually termed as a diffuser. Its basic job is to open and close letting the cold air into the refrigerator from the freezer. When you fridgerator is to cold the diffuser, also known as the damper assembly in other units, closes and when the frigerator is to warm it opens the small fins on the door letting the cold air back into the refrigerator side of the unit. There is also a control for this diffuser located in the ceiling of your fridgerator as well. Around this time of year do to the tempreture getting hot outside I do notice more diffuser's that I have to change in a week more then diffuser controls. Is this the area that is makeing that poping sound on you? Carefully remove the diffuser not breaking either of the two thermostat lines and inspect to see if you have an ice build on the inner fins of the diffuser if you do it is best to replace the diffuser itself instead of opening it or proping something on the inside of it to keep it open. If you have any further questions message me back. And please also remember when our chat has fully concluded to rank how this opinion has helped in your appliance situation it allows me to continue helping others in similar situations in the future Thanks
Rick
p.s the part number for the diffuser is W10128734

I have a 600mm Chateau range hood with the same problem. To access the globe chamber, you need to first remove the plastic diffuser from the underside of the rangehood. Located at one end of the diffuser will be a small slot approx 10 mm long. Insert a small flat blade screwdriver into this slot and carefully depress the plastic tongue of the diffuser by gently pushing the head of the screwdriver away from the diffuser. As the tongue disengages from the frame you should be able to grasp the edge of the diffuser and pull it away from the frame. Once the diffuser has been removed from the frame, you will be able to change the globe.
To reinstall the diffuser, insert the plain end of the diffuser into the frame of the the rangehood (above the globe) and gently push the clip end back to its flush position.

If the compressor is a diaphram type, the diaphram is likely bad. Replace the diaphram.

yes it won't hurt it

Here are part numbers of plate diffusion of Sony KP-48S75 TV

4-070-280-11 PLATE (L), DIFFUSION

4-058-455-11 PLATE (F), DIFFUSION