Can not press next with Action Replay DS v. 1.60

On the computer plug the action replay in and install the cd that comes with it. To add a new code go to setting and press new, then name the code and copy and paste them code onto it. Put it in your code folder and download the cheats to your action replay.

Your Action Replay DS hardware may require resetting if you are experiencing any of the following problems:

* Code Manager PC software is reporting that Action Replay DS does not contain enough free space when it actually contains no codes.

* Code Manager PC software is reporting the console`s battery is low when it’s actually fully charged.

* Multicolored bars are shown on the screen after you confirm the entry of a game ID when trying to manually enter codes.

* You can use the Code Manager PC software without any problems until the Action Replay DS is connected via USB set to the update mode on the console, at which point Windows shows a run time error.

If you are experiencing any of these problems, please follow the steps below to reset the Action Replay DS hardware. Please beware that resetting the Action Replay DS hardware will not restore a default codelist, and any codes which are stored on the Action Replay DS will be erased.

1. With your console powered off insert the Action Replay DS

2. Hold down buttons A+B

3. Turn your console on

4. With A+B still held down, as soon as you see the Action Replay DS license screen press and hold down buttons START+SELECT so that you now have 4 buttons held down

5. Hold all 4 buttons down for around 10 seconds until the Action Replay DS loads to it`s home screen

6. If Action Replay DS doesn’t hold on the license screen for around 10 seconds when you do this, you may need to turn off and try again

Please make sure that you are entering the Game ID correctly. Follow these steps to find the Game ID before beginning the code entry process: •Turn on the Nintendo DS with the Action Replay inserted •At the Main Menu when you are instructed to “Insert Game Cart”, remove the Action Replay and insert the game. •On the top screen of the DS, the name of the game (or Unknown Game) will appear. •The number under the Game Name is the Game ID. Please be sure to include the dash when entering the Game ID into the Action Replay.

If this did not solve your problem, please leave a comment and I will get back to it as soon as I can.

first you have to turn the ar on. Put the game in and click on the star. (bottom left hand corner) Then click on add new code/cheat.then type in cheat name, then typen code at next screen.

That's Easy. There's A master code you have to enter for the Game in your Action Replay. Go to Pokemon Platinum on The Games List of Your Action Replay. Then Click the Edit Button, But DO NOT change the Name. Just Click Next. Next It will Ask You to Enter New Game Id. Enter This Code: CPUE-3811DEF6 Then Click Next. Now you Should be Able to use your Action Replay for Pokemon Platinum. Enjoy.

i had the same prob
Your Action Replay DS hardware may require resetting if you are experiencing any of the following problems:
* Code Manager PC software is reporting that Action Replay DS does not contain enough free space when it actually contains no codes.
* Code Manager PC software is reporting the console`s battery is low when it’s actually fully charged.
* Multicoloured bars are shown on the screen after you confirm the entry of a game ID when trying to manually enter codes. * You can use the Code Manager PC software without any problems until the Action Replay DS is connected via USB set to the update mode on the console, at which point Windows shows a run time error.
If you are experiencing any of these problems, please follow the steps below to reset the Action Replay DS hardware. Please beware that resetting the Action Replay DS hardware will not restore a default codelist, and any codes which are stored on the Action Replay DS will be erased.

1. With your console powered off insert the Action Replay DS
2. Hold down buttons A+B
3. Turn your console on
4. With A+B still held down, as soon as you see the Action Replay DS license screen press and hold down buttons START+SELECT so that you now have 4 buttons held down
5. Hold all 4 buttons down for around 10 seconds until the Action Replay DS loads to it`s home screen
6. If Action Replay DS doesn’t hold on the license screen for around 10 seconds when you do this, you may need to turn off and try again

from codejunkies

Your Action Replay DS hardware may require resetting if you are experiencing any of the following problems: * Code Manager PC software is reporting that Action Replay DS does not contain enough free space when it actually contains no codes. * Code Manager PC software is reporting the console`s battery is low when it?s actually fully charged. * Multicoloured bars are shown on the screen after you confirm the entry of a game ID when trying to manually enter codes. * You can use the Code Manager PC software without any problems until the Action Replay DS is connected via USB set to the update mode on the console, at which point Windows shows a run time error. If you are experiencing any of these problems, please follow the steps below to reset the Action Replay DS hardware. Please beware that resetting the Action Replay DS hardware will not restore a default codelist, and any codes which are stored on the Action Replay DS will be erased. With your console powered off insert the Action Replay DS Hold down buttons A+B Turn your console on With A+B still held down, as soon as you see the Action Replay DS license screen press and hold down buttons START+SELECT so that you now have 4 buttons held down Hold all 4 buttons down for around 10 seconds until the Action Replay DS loads to it`s home screen If Action Replay DS doesn?t hold on the license screen for around 10 seconds when you do this, you may need to turn off and try again whats an ard? from code junkies

the ds cartridge need to be reset.

do it by using this method.

1. With your console powered off insert the Action Replay DS
2. Hold down buttons A+B
3. Turn your console on
4. With A+B still held down, as soon as you see the Action Replay DS license screen press and hold down buttons START+SELECT so that you now have 4 buttons held down
5. Hold all 4 buttons down for around 10 seconds until the Action Replay DS loads to it`s home screen
6. If Action Replay DS doesn’t hold on the license screen for around 10 seconds when you do this, you may need to turn off and try again

you can tell if it needs resetting by;
Code Manager PC software is reporting that Action Replay DS does not contain enough free space when it actually contains no codes.
* Code Manager PC software is reporting the console`s battery is low when it’s actually fully charged.
* Multicoloured bars are shown on the screen after you confirm the entry of a game ID when trying to manually enter codes. * You can use the Code Manager PC software without any problems until the Action Replay DS is connected via USB set to the update mode on the console, at which point Windows shows a run time error.

try putting the code in a couple of times then try without the - and then put the id code in fully with the - and hopefully it works

The problem is that the games or the ds action replay game slot is unfunctional. If it is the AR, just start up the action replay and eject it. Then put the game in, and start playing. To enter codes, leave the AR in and enter the codes. after you enter codes, the AR will save atomaticly.