I have a 30H4054 and need to change the IP address

Method 1:
To release and renew your IP address:


Step 1
Go to "Start > Run" and type "cmd" (without quotation marks), then select "OK"
#
Step 2


Type "ipconfig /release" (without quotation marks) and press "Enter"
#
Step 3


Once the prompt returns, type "ipconfig /renew" (without quotation marks), then hit "Enter,"
#
Step 4

Last, type "exit" (without quotation marks) then press "Enter" to close the window.


you have a new ip address.

Method 2
It's simple to change the Ip-address..You can reset the modem or switch for a minute and the switch on it..Check the ip-address at Ip-details.com if your ip address changed .It's Dynamic ip address ....You can change it many times by resetting the modem...Before changing check your previous ip ,so that you can know the difference.This is will not work if your ip address is a static ip address...Static ip will not change even if you reset the modem.


Method 3:
You can use proxy server or hide ip address software to change the ip address...But it's not legal to hide ip address always..It helps to hide your ip address from hackers..So whenever you need you can hide ip..Don't hide ip address always .. You can also display your ip from Canada using proxy,even if you are in USA.

Method 1:
To release and renew your IP address:


Step 1
Go to "Start > Run" and type "cmd" (without quotation marks), then select "OK"
#
Step 2


Type "ipconfig /release" (without quotation marks) and press "Enter"
#
Step 3


Once the prompt returns, type "ipconfig /renew" (without quotation marks), then hit "Enter,"
#
Step 4

Last, type "exit" (without quotation marks) then press "Enter" to close the window.


you have a new ip address.

Method 2
It's simple to change the Ip-address..You can reset the modem or switch for a minute and the switch on it..Check the ip-address at www.ip-details.com if your ip address changed .It's Dynamic ip address ....You can change it many times by resetting the modem...Before changing check your previous ip ,so that you can know the difference.This is will not work if your ip address is a static ip address...Static ip will not change even if you reset the modem.


Method 3:
You can use proxy server or hide ip address software to change the ip address...But it's not legal to hide ip address always.It helps to hide your ip address from hackers..So whenever you need you can hide ip..Don't hide ip address always.You can also display your ip from Canada using proxy,even if you are in USA.

There are two types of ip address available..One is static ip address it will not change forever...But another ip address is Dynamic ip address.It will change..If you need to change dynamic ip ,you can reset the modem it will assign new ip address for you...everytime you can reset the modem and get new ip address...It\'s possible only if you have dynamic ip...You can check whether your isp provided ip is static ip or dynamic ip by visiting the site IP-DETAILS.COM

This computer as any once assigned a IP address is locked to it

I am not that much clear whether you can change your Ip adress, but any queries regarding Ip-detais can be solved here, http://www.ip-details.com/

in your case, you only need to change the range expander's IP address from 192.168.0.30 to 192.168.1.30

to do this, you need to connect a computer's LAN cable directly to the range expander's LAN port. when both devices are powered ON, then access the initial IP address http://192.168.0.30

when you are in the web interface, click the LAN button and enter the suggested ip under the IP text box: 192.168.1.30 see figure below.


when you already set the IP, click on APPLY. then you are good to go. You can then connect the router, then connect the range expander to one of the router's port, then computers.

definately you will need to change the IP address.
But you can also change the IP address of the wireless extender.
so instead of changing the IP address of the router, you can change the IP address of the extender.
For that you will need to connect the computer to the Extender.
assign a static IP to the computer 192.168.0.10 and Default gateway 192.168.0.30. that will open the set up page of the extender.
change the IP addres of the extender to 192.168.1.30.
that will help you.
For more info about networking click Here

For help setting the address for a network printer, see articles here and here.,and possibly here. Beyond that, I'm not familiar with that print server. Perhaps this will help.
We probably need more info about the system, printer, OS, etc.

Changing Printer's IP Address isn't that complicated. There are two ways on how to change the printer's IP Address.

If you know the old printer's IP address, you can simply type that old IP address on the Address Bar of your Internet Explorer or any other browser (ex: http://192.168.1.101). It should redirect you to the printer's User Interface. From there you can go to Network then TCP/IP settings. You can change the IP address of the printer. Make sure to use an IP address within the same range of your network.

The other way to change the printer's IP address is by its own Menu/Settings on the printer's LCD panel.
On your printer, press Menu then got Settings. Look for Network or LAN settings and click on Advance. Select TCP/IP and click on Edit. You can now change the IP address of the printer from there. Click on Done or Save after that.

Note: Make sure the use the correct IP address within the network's range.

To check your IP you need to Go To Start Rum and type cmd and enter
You will find a DOS screen poped up . you need to type Ipconfig . It list you your IP. You need to have a local admin to change your IP