How can I get blueprints to put back together a 2007 Troybuilt Pony riding lawnmower? It needed several parts. They've all been purchased and replaced, however, putting the thing back together is like a puzzle...and we no longer remember how it was before we took it apart. Please help.

Get a parts diagram of carb. from Partshouse or sears direct

Type Troybuilt parts in Google browser or bing. This will give you many options for parts and schematics.

I have the mower let me know what your trying to wire.

http://www.partstree.com/parts/?lc=troy_bilt&mh=22

check your fuel plug it's the nut that holds the little silver colored bowl on. it likes to get clogged and stop fuel flow

must be tecumseh motor, can't find that exact number tho 7TPXS does not show up. but a carb for that model would be part number 640346 if its the motor with the cylinder on a angle not straight up and down prices vary 65.00 to 80.00 cheaper is at psep.biz. you could have put alittle more info like tiller, lawnmower, brand etc.

here are two websites that will help, the second on is a forum so it may be of more help,Tim:

http://www.ehow.com/how_7983565_use-troybilt-pony-tiller.html

http://forums2.gardenweb.com/forums/load/tools/msg1014281421084.html

Do you mean that you can start it normally using the choke (that would be choke CLOSED), but then it dies immediately when you move it to run (that would be choke OPEN)? And if you leave the choke in the starting position that it dies after 20-30 seconds?----- If I have that all right, then you definitely have a restriction in the gas supply. Drain all of the gas from the mower and don't use any old gas. If you have any more old gas (from last season) don't use it. If this mower has a gas filter, replace it. Put just a little fresh gas in the tank plus a little of the cleaner. Start it up, do that a few times if needed. Use a fuel additive such as Sea Foam to keep the gas from gumming up so fast.

Not technically a solution, but there are Troybuilt tiller forums out there on the net. MTD bought them out some years back and some parts are still available. I had to go thru them to find a part number for a mid 80's Horse unit that had a broken drive coupling. Anyways, they have parts breakdowns and manuals on their site. And I've seen some on ebay if you need parts.

Could be anything. An air leak between carb and motor, wrong jet settings(air fuel mixture), choke adjustment, water in gas, and more.