Remove do not disturb - NorStar Startalk Flash 2 Phone

You need to enter the "Make Set Busy Deactivate Flexible Feature Code" - the "Flexible" part meaning the system administrator can change it, so you'll have to ask. The default appears to be #62.

go to settings-> do not disturb and make sure do not disturb is off, you can also check to see if do not disturb is on by seeing if there is a moon in your status bar

If you do not have the owner's manual, try removing it from the phone line and remove any batteries that it might have too. Completely removing any electrical source usually resets most electronics to its out of the box mode.

Your Wake up device is in DND.... it either didn't hang up or it didn't answer. You should contact your vendor to have them check the RAD (Recorded Announcement Device).
Unless you know the extension number associated with it (the installers use different numbering from site to site and I couldn't even guess for you), you won't be able to clear the DND. If you do know the ext number... follow these instructions from the attendant console.

To apply Do Not Disturb on an extension:
• Press the DO NOT DISTURB function key or dial *85. The LCD shows EXT-NUMBER ?.
• Dial the desired extension number.
• Press the DND ON softkey.
• If desired, press the NEW EXT softkey to apply or remove Do Not Disturb on another extension.
• Press the EXIT softkey.
To remove Do Not Disturb on an extension:
• Press the DO NOT DISTURB function key. The LCD shows EXT-NUMBER ?.
• Dial the desired extension number. The LCD shows the extension number and DO NOT DISTURB.
• Press the DND OFF softkey.
• If desired, press the NEW EXT softkey to apply or remove Do Not Disturb on another extension.
• Press the EXIT softkey.

The short code to disable Do Not Disturb is 400, 401 sets the Do Not Disturb. I have sent you a video explaining Do Not Disturb on a Samsung DCS, there are other useful tips on youtube if you search for abbeytel. Please visit www.abbeytelecom.com for written introduction, thank you

Attendant
To apply Do Not Disturb on an extension:
• Press the DO NOT DISTURB function key or dial *85. The LCD shows EXT-NUMBER ?.
• Dial the desired extension number.
• Press the DND ON softkey.
• If desired, press the NEW EXT softkey to apply or remove Do Not Disturb on another extension.
• Press the EXIT softkey.
To remove Do Not Disturb on an extension:
• Press the DO NOT DISTURB function key. The LCD shows EXT-NUMBER ?.
• Dial the desired extension number. The LCD shows the extension number and DO NOT DISTURB.
• Press the DND OFF softkey.
• If desired, press the NEW EXT softkey to apply or remove Do Not Disturb on another extension.
• Press the EXIT softkey.

FEATURE 85 sets "Do Not Disturb", and to cancel any feature, add a # sign.

FEATURE # 85 will cancel it. :)

hey i have the solution. push the function button, then pound, then 85. hopes this helps. i had the same problem and i worked for me

Just press the same button again and the light will go off removing DnD option