Yamaha S661 Player wont play multi region

If you suffer from region code troubles, you can download a region free DVD player software tool on your pc and then you can play discs of any regions you want. You can try Leawo Blu-ray Player which is a free Blu-ray player and a region free player.

probably you are trying to play a disc that is not zone free or you need a code for your player to make it zone free. you may be playing a zone 2 disc ( PAL) on a machine that only takes zone 1 (NTSC) or vica-versa.

DVD REGION FREE & BLUE-RAY REGION FREE
To changethe Region code on your DVD player, open Control Panel - System - Hardware -Device manager, and click on DVD/CD ROM drives, then right click on the DVDdrive and click Properties then click on DVD Region.
You can enter a new region and it also shows you how many changes have beenmade.
NOTE you can make only 4 changes and the player will lock permanently on the4th change.
If you want to play DVDs from any region you maybe able to upgrade the firmwareto make it region free BUT if you make a mistake or installed the wrongfirmware the player will be a piece of junk.
The best solution to make the player region free is to install a piece ofsoftware (Passkey for DVD) that allows you to play DVDs from any region andPasskey for Blu-ray that allows you to play Blu-rays from any region. There areseveral available on the Internet but my favourite is DVD-Region Free From: -
www.dvdfab.com/products,free.htm

Try www.dvdexploder.com
Hope that helps.

In a word....NO.

Only DVD's themselves can be multi-region (region code 0).

I always advise on this site that you NEVER change the region code on your DVD player! Here is why....

To prevent DVD copy piracy, every DVD player from EVERY manufacturer allows (if it is allowed at all) only TWO changes to the region code. A third attempt to change the region code permanently locks the player and turns it into a paperweight.

If you happen to be the rare exception to the rule.... that you have moved to a new place that requires you to change the region code to view locally purchased DVD's, then by all means change it ONCE to be able to use your DVD player. Please remember that you can only change it one more time after that though! You will unfortunately not be able to watch DVD's that are from your old region.

the region code means the player does not support the disc your playing each country is given a region code for dvd australias is region 4 if you buy a dvd from another country it wont work you can get multi region codes for dvd players im not sure of pioneers code but try using a dvd from your country region and youl find it works just fine you can also try asking a tech on fixya for the multi region code for the model dvd player you have.


best of luck


merry christmas

DVD PLAYER SAYS CANNOT PLAY THIS DISC

my v.zon plays but cannot see picture clear it is a portable dvd player.

How to activate the multi-region functionality
1. Make sure the disc tray is open and remove any discs from the player.
2. Key in ‘7 7 7 7’ using the remote control.
3. Select region 0 for a region-free setting.

see if this works

1. Power on
2. Press PLAY
3. Enter 2, 7, 4
4. Enter 222 222 005 255
5. Press PLAY
6. Power off