T.v. clicking and wont turn on..

No,probally a capacitor the help the power supply board to work or other boards to work is blown.Call some tv shops get a best quotes prices,get a tv tech out to it fix,if ur tv is out of warrenty.

Ur power board it dead.Replaced capacitors that puff up or pop open.Or replaced the whole board.

Well if it is DLP TV then crack/ pop sound was broken lamp in TV and if its another kind of TV as you did not mention its model and brand then have to check accordingly.

Hi there! This could be as a result of several boards. Y-sus, Z-Sus or power supply. One would need to check that all the relevant Voltages on the power supply are actually present. Next would be to check the Fuses on either Y or Z-Sus boards. The board with the fuse blown would most likely be the one at fault. However it blows for a reason so replacing the fuse on these boards will probably not help. But it is worth a shot. If all else fails refer to a repairer. If you can get the boards and want to try doing it yourself it may or may not prove to be successful. Please beware of HIGH CURRENT before you proceed. Best Wishes and Good Luck, JUS004

Your mainboard is damaged, just replace it and that will fix it.

Bad caps in the SMPS.

hi friend,,,,,,,
i think due to high voltage resistor in dma board has blasted,,,,,
did u see any burnt marks,,,,,,,,,reply me

thank u,,,,,,,,

If you have a Sony DLP, then the loud pop you heard is your lamp.  The lamps last approx. 4K-6K viewing hours.  Read your manual for replacement part number to reorder and very simple to replace yourself.

My TV has a picture but its very poor quality and its fading ,blurry color it is not clear what can i do to fix.Thanks