How do you set the time on the Canon sure shot 80u

Try calling Camren Photographic Resources inc 1340 W. Buyers Pl. Denver, Co. 80223 303-698-1797.

Hello! Welcome to FixYa!
According to the review features of Sony Cyber-shot DSC-T10 Digital Camera, this camera doesn't have a feature for superimposing date/time on images, however you can print images with the date superimposed, So by default u cannot put the time or date stamp on your images, but after taken the images you can manually put the stamp and can print the images.
Don't hesitate to let me know if you want any further assistance.
I hope this solution helps you
Thank you and Keep using FixYa!

it is likely that this model of camera spins the entire roll onto the take-up spool, and then slowly rewinds one frame at a time until the last picture is taken. Then it has already almost rewound,

This shows up when you load the film. The cameras digital counter counts up to the number of pictures available, and counts downward each picture taken.

The camera is on its last legs and is going to fail sometime soon. It may be time for a new camera.

throw it away, its already old, buy new ones a pentax g40, its a computer compatible.

poor product when it happens to so many cameras. cp

1. With power off, press the MODE button to select the DATE mode.
2. Press the zoom out (three trees) button for more than two seconds to enter the date/time set mode.
3. Press the zoom out (three trees) button to select year, month, day, hour, or minute (selected number will flash).
4. Use the zoom in (one tree) button to advance the number.
5. Repeat steps 3. and 4. to set each value.
6. Press the zoom out (three trees) button until the colon (in the hours:minutes) is flashing. When the colon stops flashing, date and time setting is completed.
7. Press the MODE button and the power will switch off.

1. With power off, press the MODE button to select the DATE mode.
2. Press the zoom out (three trees) button for more than two seconds to enter the date/time set mode.
3. Press the zoom out (three trees) button to select year, month, day, hour, or minute (selected number will flash).
4. Use the zoom in (one tree) button to advance the number.
5. Repeat steps 3. and 4. to set each value.
6. Press the zoom out (three trees) button until the colon (in the hours:minutes) is flashing. When the colon stops flashing, date and time setting is completed.
7. Press the MODE button and the power will switch off.

I've done some research and found out that the flashing H is Electronic failure and needs repair.