My acer aspire one d225e wont boot up and says intel undi, pxe-2.0 (build 083) copyright (c) 1997-2000 intel corporation for atheros pcie ethernet controller v2.0.2.2(03/31/10) check cable connection! pxe-m0f: exiting intel pxe rom. no bootable device -- insert boot disk and press any key
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You hard drive is missing from the system. Just does not recognize it.
Remove
the hard drive and reseat (reconnect). Check BIOS by pressing an F key during
boot. Look on the screen for correct Function key. Might be F2 key. Verify
BIOS recognizes the drive. It must be listed! There is no going forward if
it's not. Check boot order and make internal hard drive first. Save and
restart.
Go to the bios setup and see if there are any HDD installed. If no remove HDD from laptop then put it back, restart then go bios setup again and see if it is installed. If still not, you might need to replace your HDD with a new one.
enter to bios setup and remove Ethernet controller from boot sequence or make it last on the list. and about operating system not found if you already use your system without problem then reinstall the system from a cd .
Press F2 on boot. go to bios, ie insydeh20 setup utility. goto boot menu. select legasy in type. select your usb drive and hdd as a first boot device. save and reboot.
You get this kind of message when the laptop could not identify that there is a hard disk drive installed inside the laptop. Check your hard drive & make sure it is not dead.
×